Xbox 360:RGH/Solder Points
Jump to navigation
Jump to search
Phat
3.3v 
1.8V (Only if using an X360 ACE)
Non-Xenon 
Xenon
PLL
Bottom 
Top (under CPU heatsink; requires scraping) 
STBY_CLK
Top (Non-Xenon) 
- There are 2 points boxed; either can be used.
Top (Xenon)
Bottom 
POST
Bottom 
Top (requires scraping) 
CPU_RST
R8C2 
C7R112 
J8C1: 
GND
Near 3.3v 
AV Port
Any other ground point
Slim (Trinity)
PLL
No alternative point!
CPU_CLK (Only if using an X360 ACE V4/V5)
Top
- There are two points circled for C1 and C2 respectively; either can be used or bridged.
Bottom
POST & RST
- There are two RST points, either can be used.
- A Postfix adapter can be used on Trinity in case it's damaged.
STBY_CLK
C3B10 (Top)
FT3N2 (Bottom)
GND & 3.3V
Slim or E (Corona/Waitsburg/Stingray)
File:5lY3TID.png
Postfix adapter installation guide
PLL
- No alternative point!
CPU_CLK (Only if using an X360 ACE V4/V5)
- There are two points circled for C1 and C2 respectively, either can be used or bridged.
POST & RST
- There are two RST points, either can be used.
- If POST on the bottom is disabled (like in Waitsburg & Stingray boards) or damaged, a postfix adapter is required.
