Xbox 360:RGH/Solder Points

From ConsoleMods Wiki
Revision as of 23:58, 4 September 2023 by Nadaman (talk | contribs)
Jump to navigation Jump to search

Phat

3.3v

Y5p0dxP.jpg

1.8V (Only if using an X360 ACE)

Non-Xenon

1v8-HDMI.png

Xenon

1v8-Xenon.png

PLL

Bottom

Fat360PLL.jpg

Top (under CPU heatsink; requires scraping)

Fat360topPLL.jpg

STBY_CLK

Top (Non-Xenon)

Fat360STBY CLK.jpg

  • There are 2 points boxed; either can be used.

Top (Xenon)

File:STBY_CLK-Xenon.png

Bottom

CLK.png

POST

Bottom

Post.png

Top (requires scraping)

FT6U1 topside.png

CPU_RST

R8C2

VXi9LgC.jpg

C7R112

RST.png

J8C1:

Cp2OBF3.jpeg

GND

J2B1 Header

J2b1gnd.png

AV Port

Any other ground point

Slim (Trinity)

PLL

RGH1.2 Slim PLL.jpg

No alternative point!

CPU_CLK (Only if using an X360 ACE V4/V5)

Top

TrinityC1C2.png

  • There are two points circled for C1 and C2 respectively; either can be used or bridged.

Bottom

TrinityBottomC1C2.png

POST & RST

TrinityPOSTandRST.png

  • There are two RST points, either can be used.
  • A Postfix adapter can be used on Trinity in case it's damaged.

STBY_CLK

C3B10 (Top)

TrinityHanaCLK.jpg

FT3N2 (Bottom)

Ft3n2.jpg

GND & 3.3V

J2C3

Trinity 3v3GND.png

Slim or E (Corona/Waitsburg/Stingray)

File:5lY3TID.png
Postfix adapter installation guide

PLL

RGH1.2 Slim PLL.jpg

  • No alternative point!

CPU_CLK (Only if using an X360 ACE V4/V5)

CoronaCPUCLK.png

  • There are two points circled for C1 and C2 respectively, either can be used or bridged.

POST & RST

Corona POSTandRST.png

  • There are two RST points; either can be used.
  • If POST on the bottom is disabled (like in Waitsburg & Stingray boards) or damaged, a postfix adapter is required.

GND & 3.3V

J2C3

Corona 3v3GND.png