Xbox 360:Alternate Solder Points

From ConsoleMods Wiki
Revision as of 05:01, 16 September 2023 by Nadaman (talk | contribs)
Jump to navigation Jump to search

Phat

3.3v

  • J2B1
    • Y5p0dxP.jpg

1.8V (Only if using an X360 ACE V1/V2/V3)

  • Non-Xenon
    • 1v8-HDMI.png
  • Xenon
    • 1v8-Xenon.png
PLL Repair on a Phat motherboard (required if bottom pad is damaged). Image credit to TheLazyITGuy.

PLL

  • Bottom
    • Fat360PLL.jpg
  • Top (under CPU heatsink; requires scraping)
    • Fat360topPLL.jpg

EXT_CLK

  • Bottom (Under CPU)
    • EXT CLK.png

STBY_CLK

  • Top (Xenon)
    • STBY CLK-Xenon.png
  • Top (Non-Xenon)
    • Fat360STBY CLK.jpg
    • There are 2 points boxed; either can be used.
  • Bottom (Non-Xenon)
    • CLK.png

FT6U1 POST (RGH 1.2 or EXT_CLK)

  • Bottom
    • Post.png
  • Top (requires scraping)
    • FT6U1 topside.png

FT6U7 POST (RGH 1, 2, or 3)

  • Bottom
    • WEFEjMr.jpg
  • Top (requires scraping)
    • (requires scraping)

CPU_RST

  • R8C2
    • VXi9LgC.jpg
  • C7R112
    • RST.png
  • J8C1
    • Cp2OBF3.jpeg

GND

  • J2B1 Header
    • J2b1gnd.png
  • AV Port
  • Any other ground point

Slim (Trinity)

PLL

  • Bottom
    • RGH1.2 Slim PLL.jpg
    • No alternative point!

CPU_CLK (Only if using an X360 ACE V4/V5)

  • Top (HANA)
    • TrinityC1C2.png
    • There are two points circled for C1 and C2 respectively; either can be used or bridged.
  • Bottom
    • TrinityBottomC1C2.png

POST & RST

  • Bottom
    • TrinityPOSTandRST.png
    • There are two RST points, either can be used.
  • Top (Postfix Adapter)
    • PostfixadapterV1 example.gif
    • A Postfix adapter can be used on Trinity in case the POST point is damaged.

STBY_CLK

  • C3B10 (Top)
    • TrinityHanaCLK.jpg
  • FT3N2 (Bottom)
    • Ft3n2.jpg

GND & 3.3V

  • J2C3
    • Trinity 3v3GND.png

Slim or E (Corona/Waitsburg/Stingray)

PLL

  • Bottom
    • RGH1.2 Slim PLL.jpg
    • No alternative point!

CPU_CLK (Only if using an X360 ACE V4/V5)

  • Top
    • CoronaCPUCLK.png
  • There are two points circled for C1 and C2 respectively, either can be used or bridged.

POST & RST

  • Bottom
    • Corona POSTandRST.png
    • There are two RST points; either can be used.
  • Top (Postfix Adapter)
    • PostfixadapterV1 example.gif
    • If POST on the bottom is disabled (like in Waitsburg & Stingray boards) or damaged, a postfix adapter is required.

Postfix adapter installation guide

GND & 3.3V

  • J2C3
    • Corona 3v3GND.png