Phat
3.3v, GND, and RGH 2 i2C
1.8V (Only if using an X360 ACE V1/V2/V3)
PLL Repair on a Phat motherboard (required if bottom pad is damaged). Image credit to TheLazyITGuy.
CPU_RST
EXT_CLK
FT6U1 POST (RGH 1.2 or EXT_CLK)
- Bottom
- Top (requires scraping)
FT6U7 POST (RGH 1, 2, or 3)
- Bottom
- Top (requires scraping)
GND
PLL
- Bottom
- Top (under CPU heatsink; requires scraping)
STBY_CLK
- Top (Xenon)
- Top (Non-Xenon)
![Fat360STBY CLK.jpg](/wiki/images/thumb/5/51/Fat360STBY_CLK.jpg/286px-Fat360STBY_CLK.jpg)
- There are 2 points boxed; either can be used.
Slim (Trinity)
3.3v, GND, and RGH 2 i2C
CPU_CLK (Only if using an X360 ACE V4/V5)
- Top (HANA)
![TrinityC1C2.png](/wiki/images/f/f2/TrinityC1C2.png)
- There are two points circled for C1 and C2 respectively; either can be used or bridged.
PLL
- Bottom
![RGH1.2 Slim PLL.jpg](/wiki/images/thumb/7/78/RGH1.2_Slim_PLL.jpg/497px-RGH1.2_Slim_PLL.jpg)
- No alternative point!
POST & RST
- Bottom
![TrinityPOSTandRST.png](/wiki/images/thumb/8/80/TrinityPOSTandRST.png/700px-TrinityPOSTandRST.png)
- There are two RST points, either can be used.
- Top (with Postfix Adapter)
![PostfixadapterV1 example.gif](/wiki/images/thumb/6/6f/PostfixadapterV1_example.gif/527px-PostfixadapterV1_example.gif)
- A Postfix adapter can be used on Trinity in case the POST point is damaged.
STBY_CLK
Slim or E (Corona/Waitsburg/Stingray)
3.3v, GND, and RGH 2 i2C
CPU_CLK (Only if using an X360 ACE V4/V5)
- Top
- There are two points circled for C1 and C2 respectively, either can be used or bridged.
PLL
- Bottom
![RGH1.2 Slim PLL.jpg](/wiki/images/thumb/7/78/RGH1.2_Slim_PLL.jpg/391px-RGH1.2_Slim_PLL.jpg)
- No alternative point!
POST & RST
- Bottom
![Corona POSTandRST.png](/wiki/images/thumb/a/a4/Corona_POSTandRST.png/392px-Corona_POSTandRST.png)
- There are two RST points; either can be used.
- Top (Postfix Adapter)
![PostfixadapterV1 example.gif](/wiki/images/thumb/6/6f/PostfixadapterV1_example.gif/391px-PostfixadapterV1_example.gif)
- If POST on the bottom is disabled (like in Waitsburg & Stingray boards) or damaged, a postfix adapter is required.
Postfix adapter installation guide