PS4:Updating your Firmware

From ConsoleMods Wiki
Revision as of 19:33, 18 December 2021 by Derf (talk | contribs) (Created page with "In the event that you wish to update your firmware without connecting to PSN, you can update via a USB storage device. **Ensure that there is no disk inside of the PS4 when at...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

In the event that you wish to update your firmware without connecting to PSN, you can update via a USB storage device. **Ensure that there is no disk inside of the PS4 when attempting to update the firmware**.

Updating the Firmware (Recovery Mode)

  1. Remove any disks in the Blu-Ray drive and disconnect the console from the Internet.
  2. Create a folder called "PS4" on the root of your USB storage device.
  3. Create a folder within the PS4 folder called "UPDATE".
  4. Place the desired firmware within the UPDATE folder and rename it "PS4UPDATE.PUP".
  5. Plug your USB storage device into the right-most USB port of your PS4.
  6. Boot your console into PS4:Recovery Mode by powering it on, holding the power button until it turns off, then holding it again until it does it a quick double-beep.
  7. Select "System Update" and choose "Update via Storage Media".
  8. Allow update to install and reboot.
    • You will most likely need to update your apps, such as Multiman or Rebug Toolbox, to fully use them.
Retrieved from "https://consolemods.org/wiki/index.php?title=PS4:Updating_your_Firmware&oldid=3797"