NES:NESRevival-PSU
Originally created by Merlin Shaw, the NESRevival power supply board project has been handed over to Alchme and Guardians_projects. The goal of the project is to completely Redesigning the NES Power Module to Reduce Noise and EMI. The original NES Power Module is very noisy, the power traces cross each other and the ground home path is messy. EMI was not a worry in 1985 but noise can impact picture and sound quality. Instead, we can improve it with the best of modern engineering, with classic hardware.
You can find ways to manufacture and source the boards over on the project GitHub if interested.
About the Project
There have been many improvements over time with even safety features being added to allow extra tolerance in the design for faults. We continue to think of collaborative designs and improvements for all our projects. The project is open, and design improvements are welcomed [via? Comment? PR?]
The project is open sourced using the MIT License. It can be edited, changed and sold at your own discretion. The author requests a link back to the GitHub if this helps you with your own project.
Goals with these new NES Power Modules
- Full Ground Plane that is uninterrupted and is free of traces and components.
- Power Traces that do not cross and have the GND plane below for a good return power signal.
- Have a specific NES Power Module for each use case (not try and pile everything into one board)
- Keeping units in stock, allowing for repairs to exist in 2023. Many success stories so far to share, and hopefully more to come.
- Updated installation instructions, including Part Assembly Content from the Manufacturer
changelog/notes
- Version 2.1d is currently being offered in RCA Composite only as of now.
- Keeping up on the development of USB-C NESRevival PSU Prototypes
More Info
More information and resources can be found on the project github page https://github.com/Alchme/ArtemisPower-NESRevival-Power-Module