Genesis:Sega Nomad CD Audio Mod

If you are using a flash cart that is capable of running Sega CD games, such as the Mega EverDrive Pro or MegaSD, you can optionally enable CD audio on the Nomad.

Via Triple Bypass

The best option is to install a Genesis:Triple_Bypass_Mod, which will enable CD audio without any interference, as well as improve video quality. A video covering installation of the Triple Bypass in a Nomad can be found on Long Island Retro Gaming's channel.

Via DIY Mod

This method involves soldering two 1uF (or 10uF) capacitors and two 10Kohm resistors to the motherboard to enable CD audio. The result is well balanced CD audio with no extra hiss added to speaker, headphones, or AV out port.

1. On the bottom side of the motherboard, connect wires to B1 (Audio Left) and B3 (Audio Right).
   
2. Solder the end of each wire to a 1uF or 10uF capacitor's negative side and a 10Kohm resistor on the positive leg of each capacitor.
   
3. Connect the resistor attached to the B1 wire to pin 14 of the 315-5684 (this is Left FM Input).
4. Connect the resistor attached to the B3 wire to R215's pad closest to the 315-5684 (this is pin 20 on the 315-5684, Right FM Input)