Dreamcast:Connector Pinouts

From ConsoleMods Wiki
Revision as of 16:46, 22 April 2024 by Purist (talk | contribs) (Add real signal names)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


TODO: images of connectors.

Controller

Pin Name Description
1 D0 Serial Data
2 +5V
3 GND
4 Sense Grounded by controller
5 D1 Serial Data

A/V Connector

AV Connector
Pin Description TV Mode (V & Y/C Output) SCART (15khz RGBS) VGA (31khz RGBHV)
1 GND Ground
2 Audio Right Audio Right
3 Audio Left Audio Left
4 +12v DC +12v DC
5 +5v DC +5v DC
6 VGA Select N/C N/C GND
7 RGB Select N/C GND GND
8 VSYNC Present but unused Present but unused VGA VSYNC
9 HSYNC Present but unused Present but unused VGA HSYNC
10 CSYNC N/C? CSYNC N/C
11 C S-Video Chroma N/C? N/C
12 Y S-Video Luma N/C? N/C
13 V Composite Video N/C? N/C
14 B N/C Blue Blue
15 G N/C Green Green
16 R N/C Red Red

Serial Port

Pin Description
1 +5v
2 SCK?
3 GND
4 Rx
5 Tx
6 RTS
7 CTS
8 GND?
9 RESET?
10 +3.3v

Extension Port

Lower leftmost is pin 1, upper rightmost 50. Even pins along the top when looking at exterior of console.

CN501
Pin Name Description Pin Name Description
1 +5v 2 +5v
3 +5v 4 +5v
5 G2_MDMCSN Modem chip select 6 G2_IRMDMIN used by modem/lan adapter
7 G2_RQDEVN 8 G2_RQEX1N
9 G2_RQEX0N 10 GND
11 GND 12 GND
13 G2_IREXTN used by broadband adapter 14 G2_BLN Lower byte enable (output)

Write enable when MODEMCS low

15 G2_STN 16 G2_BHN Upper byte enable

Read enable when MODEMCS low

17 +3.3v 18 +3.3v
19 +3.3v 20 G2_DSN Bus termination B
21 G2_FRN Address enable 22 G2_TRN Bus Termination A
23 GND 24 GND
25 G2_AD15 26 G2_AD14
27 G2_AD13 28 G2_AD12
29 G2_AD11 30 G2_AD10
31 G2_AD9 32 G2_AD8
33 G2_AD7 34 G2_AD6
35 G2_AD5 36 G2_AD4
37 G2_AD3 38 G2_AD2
39 G2_AD1 40 G2_AD0
41 GND 42 GND
43 CLK G2 interface clock (25MHz) 44 GND
45 GND 46 G_RST System Reset
47 GND 48 GND
49 MIDIOUT 50 MIDIIN