Xbox 360:Exploit Chart

From ConsoleMods Wiki
Revision as of 23:31, 3 May 2024 by Nadaman (talk | contribs)
Jump to navigation Jump to search

The following chart shows all compatible hacks for each console.

Exploit Xenon Zephyr Falcon/Opus Jasper Tonasket Trinity Corona Winchester
JTAG ✔️2 ✔️2 ✔️2 ✔️2 ❌1
R-JTAG ➖3 ➖3 ✔️ ✔️ ✔️ ❌1
R-JTOP ➖3 ➖3 ✔️ ✔️ ✔️ ❌1
RGH1 ➖3 ➖3 ✔️ ✔️ ✔️ ❌1
RGH1.2 ➖3 ➖3 ✔️ ✔️ ✔️ ✔️7 ✔️7 ❌1
RGH2 ❌5 ➖6 ➖6 ➖6 ➖6 ✔️ ✔️ ❌1
S-RGH ❌5 ➖4 ➖4 ➖6 ➖6 ✔️ ✔️ ❌1
Mufas ✔️ ✔️ ❌1
EXT_CLK ✔️ ✔️ TBD TBD TBD TBD TBD ❌1
RGH3 ✔️8 ✔️8 ✔️8 ✔️7 ✔️7 ❌1

1 Winchester consoles cannot be RGH'd or JTAG'd

2 Must check CB via NAND dump to see if it is JTAGable. Most - but not all - consoles below 7371 and some on 7371 have an unpatched CB.

3 Only works on some boards and can take minutes to boot if at all - some randomly crash on PLL de-assertion. R-JTAG requires dashboard 14719, and R-JTOP requires dashboard 15572.

4 Hangs for unknown reason.

5 RGH2 and S-RGH requires the HANA chip, which is not present on Xenon.

6 Unreliable due to requirement of long wires.

7 Requires scraping solder mask off of PLL point (more difficult).

8 Often works, but more commonly has issues compared to if it's done on Trinity/Corona. On the other hand, RGH 1.2 has a much more guaranteed success rate on these motherboards.

Legend

Status Color & Symbol
Reliable ✔️
Unreliable
Impossible
To be determined TBD