CRT:14M3: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
(Created page with "{{Infobox/CRT |model = Mivar 14M3 |image = |manufacturer = Mivar |type = Consumer |size = 14" |dimensions = Width: Depth: Height: |weight = |firmware = |earliest = |latest = |regions = PAL (see article) |240p/480i = Yes |480p = No |vsync = 50/60 Hz |widescreen = No |rf = 1x (Belling-Lee) |composite = 1x (SCART) |component = 1x RGB (SCART) |headphone jack = 1x front |chassis = CS1001 |remote = X1 (also X2) |standard_boards = CS1006 tuner |optional_boards = CS1003 (...")
 
m (Text replacement - "\|service_bulletins \= \n" to "")
 
Line 28: Line 28:
|operation_manual =  
|operation_manual =  
|service_manual =  
|service_manual =  
|service_bulletins =
}}
}}
The '''Mivar 14M3''' is a TV for the Italian market made in the late 90's, basic yet almost bombproof in true Mivar style.
The '''Mivar 14M3''' is a TV for the Italian market made in the late 90's, basic yet almost bombproof in true Mivar style.

Latest revision as of 04:33, 1 November 2023

Mivar 14M3
Information
Manufacturer Mivar
Type Consumer
Size 14"
Regions PAL (see article)
240p/480i Yes
480p No
Vsync 50/60 Hz
Widescreen No
RF 1x (Belling-Lee)
Composite 1x (SCART)
Component 1x RGB (SCART)
Dimensions Width:

Depth:

Height:
Links
Chassis CS1001
Remote X1 (also X2)
Standard Boards CS1006 tuner
Optional Boards CS1003 (EP)/CS1015 (LP) teletext

The Mivar 14M3 is a TV for the Italian market made in the late 90's, basic yet almost bombproof in true Mivar style. It was later adapted to make the larger 16M1.

TDA8361

Controls

As indicated by the 9-key front panel without blue buttons, it has a minimal OSD limited to program & channel numbers and sleep timer (accessed by holding Stop): all adjustments have dedicated controls.

  • Program/Channel/AV (remote and front panel)
  • Volume (remote and front panel: latter also sets default)
  • Tone/Mute (remote)
  • Contrast (front panel)
  • Brightness and saturation (remote)
  • H position, V size, B+ voltage, Focus/Screen, G/B gain (internal)

Mods

  • The back case can be drilled to allow external access to flyback controls.
  • To reduce horizontal size to a moderate underscan, reduce by one step the retrace absorber C60 (2 kV, 6.8 → 5.6 nF).
  • Disable standby: ground pin 17 of CPU
  • Force AV: pull up pin 38 to 5 V via 1k resistor - or just remove the tuner
  • NTSC upgrade: remove R102 (SMD, pulls up pin 34 of video processor TDA8361), replace with 18 pF and 3.58 MHz quartz to ground; connect variable 0-5 V source to its pin 27 for tint control.
  • S-Video and YPbPr inputs seem to be theoretically possible but may be impractical to implement, research needed.