Dreamcast:Toro Video Box

From ConsoleMods Wiki
Revision as of 05:16, 29 July 2022 by Derf (talk | contribs) (Text replacement - "[.][ ][ ]" to ". ")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Toro is the latest and most advanced video output box for the Sega Dreamcast, made by the Behar Bros. It's packed with features and outputs every signal the Dreamcast is capable of generating.


The Sega Dreamcast is a 6th generation console that can output 240p, 480i and 480p. Until recently, accessing all resolutions would require two cables: One for 240p & 480i and another for 480p. The Behar Bros have created products that allow for only one output solution and the Toro is the culmination of all of them.


The product page and manual (will full specs) can be found here and the basic features are covered below.

Overview / Pictures

The Toro offers both SCART and VGA outputs, as well as L/R stereo audio. Both ports support all resolutions and output video at the same time, allowing for dual-outputs. Also, both the SCART connector and RCA jacks output audio at the same time as well.

The Dreamcast cable is a bit snug, so make sure it's pushed in all the way, or it won't work.

Once you remove the top cover, all the features are accessible.

  • On the bottom left, you'll see the scanline on / off switch.
  • Next to it is the switch that adjusts the scanline width.
  • The even / odd switch has two uses: When scanlines are on, it adjusts which horizontal lines the scanlines are generated on and when scanlines are turned off, it adjusts the luminosity of the image.
  • On the right is the VGA / RGB switch. This should only be changed when the Dreamcast is off!

Here's a close-up of the sync combiner switch. When it's in the "up" position, the Toro generates an RGBHV signal, which is what's expected in VGA devices. If you push the button down, the sync is combined from H/V to "S", allowing it to output RGBs in all resolutions, including 480p. The combined sync signal seems to work well with the OSSC and Framemeister, but has issues on some RGB monitors. If you're not familiar with the terms "RGBHV" and "RGBs", please read the sync page for more information.


One last cool feature: The input port is mounted horizontally, so you won't need to remove the top cover to switch between Dreamcast and VGA inputs.


Please keep in mind that the "thick scanlines" option is designed for upscalers, which is why they look may a bit strange in native resolution. Click on the image for a full-sized view:

This image is the actual 240p size, but you can click on it for a version doubled in size that might showcase the differences a bit better:

The scanline feature can be used with CRT monitors to make 480p games look more like 240p. While it's not perfect, it's a cool trick that can be used with any VGA source. Click for full-sized: