File:Height-Def NES NoCut Mod v1.9.zip: Difference between revisions

Latest revision as of 02:34, 4 July 2022

Summary

This is a mod designed by Greg Collins that adds a custom 3D printed center to the NES Toploader in order to accommodate the Hi-Def NES Mod by Kevtris inside the system without any modification to the original shell.

License

This file is licensed under the Creative Commons Attribution 3.0 Unported license.

Those who reproduce the work must attribute it in the manner specified by the author or licensor (as the parameter "Attribution details")

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	02:32, 4 July 2022	(165 KB)	Derf (talk \| contribs)	This is a mod designed by [https://twitter.com/collingall Greg Collins] that adds a custom 3D printed center to the NES Toploader in order to accommodate the Hi-Def NES Mod by Kevtris inside the system without any modification to the original shell.

You cannot overwrite this file.

File usage

The following page uses this file:

NES:Height Defnes

@@ Line 1: / Line 1: @@
 == Summary ==
 This is a mod designed by [https://twitter.com/collingall Greg Collins] that adds a custom 3D printed center to the NES Toploader in order to accommodate the Hi-Def NES Mod by Kevtris inside the system without any modification to the original shell.
+== License ==
+This file is licensed under the [https://creativecommons.org/licenses/by/3.0/deed.en Creative Commons Attribution 3.0 Unported ] license.
+* Those who reproduce the work must attribute it in the manner specified by the author or licensor (as the parameter "Attribution details")