GameCube:Connector Pinouts: Difference between revisions
Jump to navigation
Jump to search
Black Majic (talk | contribs) m (Add category) |
|||
| Line 1: | Line 1: | ||
[[Category:Pinouts]] | |||
== GameCube Controller Connector Pinout == | == GameCube Controller Connector Pinout == | ||
[[File:GameCube_Controller_Pinout.svg|right|Link=|x300px]] | [[File:GameCube_Controller_Pinout.svg|right|Link=|x300px]] | ||
| Line 19: | Line 20: | ||
| 7 || Black || 6 || Cable shielding / ground. Usually the same ground of pin 3. | | 7 || Black || 6 || Cable shielding / ground. Usually the same ground of pin 3. | ||
|} | |} | ||
== GameCube AV Connector Pinout == | == GameCube AV Connector Pinout == | ||
''Main article:[[Nintendo Multi Out]]'' | ''Main article:[[Nintendo Multi Out]]'' | ||
Revision as of 21:06, 19 February 2023
GameCube Controller Connector Pinout
| Pin # | Color | J1 | Function |
|---|---|---|---|
| 1 | Yellow | 2 | 5V Power Supply (used by rumble motor) |
| 2 | Red | 3 | DATA line: bi-directional data to/from console, pull up to 3.43V |
| 3 | Green | 4 | Ground |
| 4 | White | 5 | Ground (Extrme Skillz GC to USB interface has pins 3+4 wired as common ground) |
| 5 | - | - | Unknown |
| 6 | Blue | 1 | 3.43V logic supply |
| 7 | Black | 6 | Cable shielding / ground. Usually the same ground of pin 3. |
GameCube AV Connector Pinout
Main article:Nintendo Multi Out