GameCube:Ninjamod: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
No edit summary
(Added Ninjamod diagrams)
 
Line 3: Line 3:
== Controversy ==
== Controversy ==
The BIOS that came pre-flashed with the NinjaMod was using a modified release of GCOS version 1.4, with an entirely different backdrop applied and renamed to "NinjaShell". It started when GCOS version 1.4 was made closed-source by the author; therefore, selling modified versions violates the GPL licence.
The BIOS that came pre-flashed with the NinjaMod was using a modified release of GCOS version 1.4, with an entirely different backdrop applied and renamed to "NinjaShell". It started when GCOS version 1.4 was made closed-source by the author; therefore, selling modified versions violates the GPL licence.
== Diagrams ==
== Diagrams ==



Latest revision as of 17:55, 2 September 2023

The NinjaMod is a commercial IPL replacement based on tmbinc's open-source design. The chip has a built-in 16Mbit (2MB) flash for two BIOS banks, one for NinjaShell and the other to be programmed by the user with any BIOS of their preference.

Controversy

The BIOS that came pre-flashed with the NinjaMod was using a modified release of GCOS version 1.4, with an entirely different backdrop applied and renamed to "NinjaShell". It started when GCOS version 1.4 was made closed-source by the author; therefore, selling modified versions violates the GPL licence.

Diagrams

NinjaMod chip pinout
NinjaMod (top-side) solder points
NinjaMod (bottom-side) 'E' point
NinjaMod alternative solder points