Genesis:RGB Bypass Color Fix: Difference between revisions
Jump to navigation
Jump to search
(Created page with "As [https://www.retrorgb.com/fix-for-all-rgb-bypassed-sega-genesis.html documented here by Tianfeng], colors will be slightly incorrect if you used a regular bypass board that doesn't fully replicate the original circuit when you lift the RGB pins. To fix this, add a 5.6k resistor (three total) from the R, G, and B pads on the board to a 5V pad on the motherboard. Below is a before and after picture of the color steps in 240p Test Suite. File:3BP Color Fix Before.png|...") |
mNo edit summary |
||
Line 2: | Line 2: | ||
[[File:3BP Color Fix Before.png|600px|Before]] [[File:3BP Color Fix After.png|600px|After]] | [[File:3BP Color Fix Before.png|600px|Before]] [[File:3BP Color Fix After.png|600px|After]] | ||
[[Category:Genesis]] |
Latest revision as of 05:45, 16 April 2024
As documented here by Tianfeng, colors will be slightly incorrect if you used a regular bypass board that doesn't fully replicate the original circuit when you lift the RGB pins. To fix this, add a 5.6k resistor (three total) from the R, G, and B pads on the board to a 5V pad on the motherboard. Below is a before and after picture of the color steps in 240p Test Suite.