Marty:Floppy Drive Repair: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
(Created page with "== FDD Repair == Marty uses a brittle and trash FDD called Matsushita EME-215 or EME-216. It is also used coincidentally by more expensive MSX computers such as MSX-A1GT. It is a 26 pin FFC bezel-less drive. <gallery> FDD Marty.png|Marty FDD with melted belt Belt melted on motor.png|Clean the Belt residue off the motor and everywhere else first </gallery> Over time the drive belt has melted and needs to be replaced. When replacing the drive belt note to remove the...")
 
No edit summary
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== FDD Repair ==
== FDD Repair ==


Marty uses a brittle and trash FDD called Matsushita EME-215 or EME-216. It is also used coincidentally by more expensive MSX computers such as MSX-A1GT. It is a 26 pin FFC bezel-less drive.
Marty uses a brittle and trash FDD called Matsushita EME-215 or EME-216. It is also used coincidentally by more expensive MSX computers such as MSX-A1GT. It is a 26 pin FFC bezel-less drive.


<gallery>
<gallery>
Line 14: Line 14:
It's also recommended to clean the 26 Pin FFC Connector on both sides.
It's also recommended to clean the 26 Pin FFC Connector on both sides.


However, one issue plaguing this drive is the drive IC is commonly burned out. Even after cleaning the floppy drive heads along with changing the belt, it will only read and not have write capability.
However, one issue plaguing this drive is the drive IC is commonly burned out. Even after cleaning the floppy drive heads along with changing the belt, it will only read and not have write capability.
 
== Belt replacement ==
 
Console5 has a belt replacement available for the FM Towns Marty FDD.
 
* https://console5.com/store/msx-floppy-drive-belt-3-5.html




== FDD Replacement ==
== FDD Replacement ==


So you decided to replace the garbage drive with a more reliable drive. Luckily some PC drives can be modified to work in Japanese Retro Computers and this includes Marty.
So you decided to replace the garbage drive with a more reliable drive. Luckily some PC drives can be modified to work in Japanese Retro Computers and this includes Marty.


First, you need a 3-Mode '''bezel-less''' floppy drive. Commonly the SFD-312B can be modified for 3-Mode operation. I cannot provide photos as there are so many versions and variants of itFollowing the service manual for that specific floppy drive, however, can net you positive results.
First, you need a 3-Mode '''bezel-less''' floppy drive. Commonly the SFD-312B can be modified for 3-Mode operation. If you follow the service manual for common PC floppy drives you should be able to modify a jumper to change the RDY signal and also reroute another signalYou will still need to make a custom cable so the 34 pin floppy drive can interface with the 26 pin FFC from Marty.


[[File:Marty FDD Pinout.png|thumb|Marty FDD Pinout ]]
<gallery>
 
Screenshot 13.png|thumb|One variant of the SFD-312B Modified for 3-Mode Operation
The modification includes removing the 26P FFC connector from the dead drive and cutting up a 34P standard floppy cable to connect all the signals together. A PCB would be cleaner looking though.
Marty FDD Pinout.png|thumb|Marty FDD Pinout  
</gallery>

Latest revision as of 20:36, 31 July 2022

FDD Repair

Marty uses a brittle and trash FDD called Matsushita EME-215 or EME-216. It is also used coincidentally by more expensive MSX computers such as MSX-A1GT. It is a 26 pin FFC bezel-less drive.


Over time the drive belt has melted and needs to be replaced. When replacing the drive belt note to remove the remnants of the old belt from the pulleys on the drive.

It's also recommended to clean the 26 Pin FFC Connector on both sides.

However, one issue plaguing this drive is the drive IC is commonly burned out. Even after cleaning the floppy drive heads along with changing the belt, it will only read and not have write capability.

Belt replacement

Console5 has a belt replacement available for the FM Towns Marty FDD.


FDD Replacement

So you decided to replace the garbage drive with a more reliable drive. Luckily some PC drives can be modified to work in Japanese Retro Computers and this includes Marty.

First, you need a 3-Mode bezel-less floppy drive. Commonly the SFD-312B can be modified for 3-Mode operation. If you follow the service manual for common PC floppy drives you should be able to modify a jumper to change the RDY signal and also reroute another signal. You will still need to make a custom cable so the 34 pin floppy drive can interface with the 26 pin FFC from Marty.