Neo Geo:Pause Button Mod: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
(Created page with "While arcade games are not meant to be paused by the player, DIP switch 8 on MVS units which — when flipped to the ON position — pauses the game via software. Generally, games will freeze the characters but continue playing music and background effects. File:Neo Geo DIP Switches Bottom.png == Wiring an External Switch == Wiring an external switch to the DIP switch pins will allow you to pause the game if you do not have access to the DIP switch directly. Simpl...")
 
mNo edit summary
Line 1: Line 1:
While arcade games are not meant to be paused by the player, DIP switch 8 on MVS units which — when flipped to the ON position — pauses the game via software. Generally, games will freeze the characters but continue playing music and background effects.
While arcade games are not meant to be paused by the player, DIP switch 8 on MVS units which — when flipped to the ON position — pauses the game via software. Generally, games will freeze the characters but continue playing music and background effects.


[[File:Neo Geo DIP Switches Bottom.png]]
[[File:Neo Geo DIP Switches Bottom.png|200px]]


== Wiring an External Switch ==
== Wiring an External Switch ==

Revision as of 03:32, 8 April 2023

While arcade games are not meant to be paused by the player, DIP switch 8 on MVS units which — when flipped to the ON position — pauses the game via software. Generally, games will freeze the characters but continue playing music and background effects.

Neo Geo DIP Switches Bottom.png

Wiring an External Switch

Wiring an external switch to the DIP switch pins will allow you to pause the game if you do not have access to the DIP switch directly. Simply wire one side of a SPST switch to the pin to the left of resistor for DIP 8 and wire the other side to the pin to the right of the resistor.

Controller Mod

This method allows you to pause the game from a controller by installing a switch into a Neo Geo arcade stick or Neo Geo CD controller and using an unused wire. J Chappy on YouTube covers this process for both controllers.

  1. Run a wire from the left pin of DIP switch 8 to pin 9 on the controller port. For units with a built-in controller port (like the MV2F), the desired pin is shown below:
    Neo Geo MV2F Controller Pins.png
  2. Desolder the green wire (arcade stick) or dark blue wire inside the controller (Neo Geo CD controller) and wire it to a switch, with the other side of the switch wired to ground. Mount the switch in the top of the controller shell.