Xbox:Xecuter 2.6: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (Text replacement - "http:\/\/web\.archive\.org\/web\/\d+\/http:\/\/i\.imgur\.com\/(.+)" to "https://consolemods.org/wiki/File:$1") |
||
Line 27: | Line 27: | ||
[http://web.archive.org/web/20141027151046/http://team-xecuter.com/x3/tutorials/x3pin16.htm Full Installation Guide] - Same guide for Xecuter 3; only difference is that the external switch will be different | [http://web.archive.org/web/20141027151046/http://team-xecuter.com/x3/tutorials/x3pin16.htm Full Installation Guide] - Same guide for Xecuter 3; only difference is that the external switch will be different | ||
[ | [https://consolemods.org/wiki/File:JDRZBVu.jpg Recommended Switch Location] |
Latest revision as of 03:20, 3 May 2023
This process is dangerous and potentially can brick or fry your Xbox. It involves soldering a very small contact, so it is recommended to be experienced with soldering before proceeding. |
Xecuter 2.6 Features:
- Purple board color
- 1MB flash ROM; can set up as 1x1024k or 2x512k
- Comes with simple to connect switch bank with 3 switches: On-Off - Flash Protect - Bios Select
- Can easily be switched off to allow XBOX live to work correctly
- Cool blue LED's
- All Backups of XBOX games or imports will boot flawlessly without any patches
- Works on all models
- Compatible with CDR/CDRW/DVDR/DVDRW
- Can use cheap unbranded general purpose DVDR media
- Universal design that works on all models from all regions (USA/JAP/PAL)
- Macrovision Removed
- Compatible with Xapt3r solderless install module
Xecture 2.6CE Additional Features:
- White and red board color with curved section cutout
- Alternating 5V connector which prevents the modchip from always being on when the Xbox is off in version 1.6 Xboxes
- XLCD connector is a right angle instead of straight
Full Installation Guide - Same guide for Xecuter 3; only difference is that the external switch will be different