Xbox 360:Exploit Chart: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 28: Line 28:
| RGH1
| RGH1
| RGH1
| RGH1
| RGH3<sup>4, 5</sup>
| RGH3<sup>4</sup>
| RGH3<sup>4, 5</sup>
| RGH3<sup>4</sup>
| N/A
| N/A
|-
|-
| >14699<sup>4</sup>
| >14699
| EXT_CLK<sup>3</sup>
| EXT_CLK<sup>3</sup>
| EXT_CLK
| EXT_CLK
| RGH1.2
| RGH1.2
| RGH1.2
| RGH1.2
| RGH3<sup>5</sup>
| RGH3<sup>4</sup>
| RGH3<sup>5</sup>
| RGH3<sup>4</sup>
| N/A
| N/A
|}
|}
Line 48: Line 48:
<sup>3</sup> RGH is not currently working on Elpis Xenons with Samsung memory. A solution is being investigated. It works on all other Xenons.
<sup>3</sup> RGH is not currently working on Elpis Xenons with Samsung memory. A solution is being investigated. It works on all other Xenons.


<sup>4</sup> Update to latest dashboard prior to RGH.
<sup>4</sup> Requires scraping solder mask off of point (more difficult).
 
<sup>5</sup> Requires scraping solder mask off of point (more difficult).
 
 



Revision as of 20:48, 18 September 2022

Recommended Exploit Chart

The below chart highlights the recommended hack to use on each console.

Dashboard Xenon Zephyr Falcon1 Jasper Trinity Corona Winchester
≤73712 JTAG JTAG JTAG JTAG N/A N/A N/A
≤14699 EXT_CLK3 EXT_CLK RGH1 RGH1 RGH34 RGH34 N/A
>14699 EXT_CLK3 EXT_CLK RGH1.2 RGH1.2 RGH34 RGH34 N/A

1 Opus motherboards are Falcon motherboards without HDMI

2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles under 7371 and some on 7371 have an unpatched CB.

3 RGH is not currently working on Elpis Xenons with Samsung memory. A solution is being investigated. It works on all other Xenons.

4 Requires scraping solder mask off of point (more difficult).  

Full Exploit Compatibility Chart

The below chart shows all compatible hacks for each console.

Exploit Xenon Zephyr Falcon Jasper Trinity Corona Winchester
JTAG ✔️2 ✔️2 ✔️2 ✔️2 ❌1
RGH1 ➖3 ➖3 ✔️ ✔️ ❌1
RGH1.2 ➖3 ➖3 ✔️ ✔️ ✔️7 ✔️7 ❌1
RGH2 ❌5 ➖6 ➖6 ➖6 ✔️ ✔️ ❌1
S-RGH ❌5 ➖4 ➖4 ➖6 ✔️ ✔️ ❌1
RGH3 ✔️ ✔️ ✔️7 ✔️7 ❌1
R-JTAG+ ➖3 ➖3 ✔️ ✔️ ❌1
R-JTOP ➖3 ➖3 ✔️ ✔️ ❌1
EXT_CLK ✔️ ✔️ TBD TBD TBD TBD ❌1

1 Winchester consoles cannot be RGH'd or JTAG'd

2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles below 7371 and some on 7371 have an unpatched CB.

3 Only works on some boards and can take minutes to boot if at all - some randomly crash on PLL de-assertion.

4 Hangs for unknown reason.

5 RGH2 requires HANA chip, which is not present on Xenon.

6 Unreliable due to requirement of long wires.

7 Requires scraping solder mask off of point (more difficult).

Legend
Reliable ✔️
Unreliable
Impossible