Genesis talk:Triple Bypass Mod Sega CDX
Jump to navigation
Jump to search
 | The below was originally taken from Cdx3bps.html on RetroRGB. Bob had deleted that page and it appears it was due to it being inaccurate. Adding the instructions below for reference points. DO NOT USE THIS PAGE unless you know what you are doing! |
Sega CDX
The Triple Bypass Board is also compatible with the Sega CDX. Installation is the same as the regular triple bypass instructions but with different points on the board.
- Remove these two resistors:
- Remove the components marked in red and optionally the ones marked in purple:
- Solder wires from the RGB and ground points to the triple bypass board.
- Solder wires from the audio points to the triple bypass board.
- Alternate points? Does this need to be done regardless?
- Remove the components marked in red. If components are already missing, cut any trace between the two pads:
- Remove the components marked in red. If components are already missing, cut any trace between the two pads:
