Search results

== Adaptor Cable Fix == It's possible to create an adaptor cable to workaround the issue. Credit phoenixdownita on the Everdrive forums.

...ible to construct a comparable adapter out of a 9-pin controller extension cable so that one can not only use SJ-150/151 and Sega Master System gamepads, bu * 9-pin controller extension cable, these can be found through a variety of sources

...B/Sync signals (the CLD-RGB/RGB-SV modification is compliant) with a patch cable long enough to reach from the Laseractive chassis to the 32X unit. ...0/S1 module, including a cartridge slot extension adapter and longer patch cable.

...to accomplish this is to splice a C8 extension cable to the existing power cable, as it does not require any case modification or extra hardware. **IEC C8 extension cable (these can be found from a variety of sources such as Amazon or eBay)

[https://www.chimericsystems.com/products/controllers-usb-adapter USB Cable Adapter (for Game Save Exploit softmods)] ([https://www.amazon.com/gp/produ ...ps://chimericsystems.com/products/custom-xbox-ide-cable Custom 80 wire IDE cable] (Chimeric Systems)

...xtension-mods a ~15cm SD card extension cable], 2x M2x8mm (for the SD card extension to the mount), 6x M3x8mm (for the case), and 1x M3x16mm (for the front most * Screw the SD extension into the SD Mount.

...this form factor. It can optionally be combined with a flat cable microSD extension (or even a reverse SD to microSD adapter) to allow external access to the c

* [https://en.wikipedia.org/wiki/PlayStation_Link_Cable List of Serial Link Cable Games] ...www.retrorgb.com/xstation-3d-printed-mounts-now-available.html XStation SD extension & Tray] </li>

...e drive is open. They also can provide access to the SD card through an SD extension and other features. ...urn-20-pin-replacement-ribbon-cable-for-cd-drive.html Saturn 20 Pin Ribbon Cable]

* <s> [[N64:Extension Cable]] </s>

...049-1_Peritelevision_connector.pdf]]</ref> also define an optional S-video extension, using video and red lines to deliver Y and C to the display (and video plu ...and inadequate mechanical stability of the connector as well as the angled cable tending to obstruct other sockets, especially in the later but more common

Also worth noting, cheap controller extension cables can cause the Xbox to power on randomly due to weak shielding. ...wer button. Cut the '''yellow''' wire for that port about midway along the cable.

...out, the line/Ethernet port (depending on the peripheral installed in the extension port), and a serial port meant for link cables. There is nothing on the bot ...c drive's laser eye connected to the VA2's orange ribbon cable. The ribbon cable itself is hard to find replacements for if it gets damaged, but the disc dr

...ng the Xbox to unlock the hard drive, "hotswapping" it by plugging its IDE cable into your PC while it is running, and modifying the files on the hard drive #Move the Ndure Script file (named just "ndure" with no extension) into "...\xboxhdm\linux\ndure\", overwriting the file already there.

...and hardwired power cord, which can be pushed inside the console to reduce cable clutter. Cartridges are inserted into a slot on the right edge, which has a ...n PAL regions, with French Intellivision consoles having a hardwired SCART cable carrying RGB output instead of RF.

...on the card itself (seen on the '''EFA Linker'''), or an USB to GBA serial cable (typical of the '''Flash2Advance'''). ...'''EZ-Flash 3in1''', the '''M3 GBA Extension Pack''', and the '''EWin GBA Extension Pack''', also tend to offer rumble and/or additional memory for the DS.

...ue. If you are using a SATA hard drive, ensure you’re using an 80 wire IDE cable. ...he Xbox will reject any file longer than 42 characters, including the file extension. You will need to rename the file in order to use it. In a select few games

'''USB PORT:''' Plug the USB cable into this port. '''1)''' Insert the included USB cable into the USB port on the RetroBlaster.

...ch a setup will require two AC adapters unless one makes a suitable jumper cable (as the one included with the Super CD-ROM2 will only work with a standard ...th a PC Engine CD or Super CD-ROM2 add-on (the latter requires the PI-AD18 extension piece). Due to its eye-watering retail price of 99,800 yen, few were sold a

...the root directory of your hard drive. The files must be named with a .ISO extension. As explained above, there must be a folder labelled "wasabi" in the root o ...then you have installed the power cable incorrectly. The end of the power cable with the red and green wires must connect to the DVD-ROM and not the Xbox m