Xbox 360:Unsigned Drivers

By default, Windows 10 enforces a rule that only signed drivers can be installed. Due to the nature of many community-made tools being unsigned drivers, this may cause issues, notably with J-Runner. With this guide, you can reboot into "Unsigned driver mode" which will allow you to install unsigned drivers until the next reboot.

1. Click Start, type "cmd". Right click Command Prompt and click "Run as Administrator".
2. Select Yes or Continue if prompted by UAC.
3. Type bcdedit /set TESTSIGNING ON and press Enter.
4. Reboot your PC and verify that you see "Test Mode" on your desktop.

Your computer will now allow you to install non-digitally signed drivers. If you restart your computer again the driver signature enforcement will be re-enabled.

Alternate Method

1. Click Start > Settings > Update and Security > Recovery > Restart now (under Advanced Startup).
2. Click Troubleshoot > Advanced Options > Startup Settings > Restart.
3. When the Startup Settings page is displayed, press 7 or F7 to disable driver signature enforcement.

Your computer will now allow you to install non-digitally signed drivers. If you restart your computer again the driver signature enforcement will be re-enabled.