AV:RetroTINK-4K/Firmware History: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
No edit summary
Line 13: Line 13:
** NOTE: Because MiSTer does not send the correct de-repetition (along with crop) meta data, you will need to manually set it in the HDMI receiver menu.
** NOTE: Because MiSTer does not send the correct de-repetition (along with crop) meta data, you will need to manually set it in the HDMI receiver menu.
** Usually Input Pixels = 4/Output Pixels = 1 is sufficent unless you need 1:1 PAR modes (i.e. emulating LCD) in which case, you will need to figure out the exact number
** Usually Input Pixels = 4/Output Pixels = 1 is sufficent unless you need 1:1 PAR modes (i.e. emulating LCD) in which case, you will need to figure out the exact number
== Version 1.0.1 ==
* ''Originally released December 12th, 2023''
* [[:File:Rt4k 101.zip|Click here to download]]
Patch notes:
* Fixed SD card read freeze bug due to unexpected read latency/timeouts
* blizzz's name fixed
* Option to disable min. BFI rate cop
** For the initial update from the launch firmware, it is recommended to update by pressing and holding the reset button as you insert the USB cord rather than through the menu.
== Version 1.0 RC26 ==
* ''Original launch firmware, only provided as full SD card image''
* [[:File:Rt4k 10rc26.zip|Click here to download]]

Revision as of 00:31, 17 December 2023

This page collates all the firmware versions for the RetroTINK-4K. Use this page to revert back to an older version, or to see a complete list of changes and additions to the RT4K since its release.

Version 1.0.2

Patch notes:

  • Fixed file handler to ignore files/directories that start with '.'
  • Added warning when disabling BFI minimum frame rate limit.
  • Fixed auto-decimation bug with PS1 MiSTer core
    • NOTE: Because MiSTer does not send the correct de-repetition (along with crop) meta data, you will need to manually set it in the HDMI receiver menu.
    • Usually Input Pixels = 4/Output Pixels = 1 is sufficent unless you need 1:1 PAR modes (i.e. emulating LCD) in which case, you will need to figure out the exact number


Version 1.0.1

Patch notes:

  • Fixed SD card read freeze bug due to unexpected read latency/timeouts
  • blizzz's name fixed
  • Option to disable min. BFI rate cop
    • For the initial update from the launch firmware, it is recommended to update by pressing and holding the reset button as you insert the USB cord rather than through the menu.

Version 1.0 RC26

Retrieved from "https://consolemods.org/wiki/index.php?title=AV:RetroTINK-4K/Firmware_History&oldid=37174"