AV:RetroTINK-4K/Firmware History: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
m (Undo revision 38548 by Nmaster64 (talk))
Tag: Undo
(Undo revision 38517 by Nmaster64 (talk))
Tag: Undo
Line 2: Line 2:


{{Note|For the initial update from the launch firmware, it is recommended to update by pressing and holding the reset button as you insert the USB cord rather than through the menu.}}
{{Note|For the initial update from the launch firmware, it is recommended to update by pressing and holding the reset button as you insert the USB cord rather than through the menu.}}
== Version 1.0.6 ==
* ''Originally released January 6th, 2024''
* [[:File:Rt4k 106.zip|Click here to download]]
Patch notes:
*Interpolation, Scanline, LCD and Mask effects automatically rotate CW or CCW when RoTaTe is on
*Forced PAR and allow DAR to OFF for MiSTer Generic DV1
*Compensated for decimation change when MiSTer menu is open in 1:1 PAR mode
*Unlocked Auto-crop controls in menu for HDMI sources
*New LCD effects
**Second mono LCD pattern with adjustable horizontal size
**GBR and RGB patterns
*Fixed RoTaTe CW crop bug
*1440p120 changed to CVT-rb timing
*4K50 and 1080p50 changed to CEA-861 with extra blanks instead of using their 60 Hz versions
*Changed HDCP Alert
== Version 1.0.5 ==
* ''Originally released January 6th, 2024''
* [[:File:Rt4k 105.zip|Click here to download]]
Patch notes:
*Enabled auto-crop for HDMI sources
**AUX1 - vertical trim only
**AUX2 - crop active and stretch to 4:3
**AUX3 - crop active and stretch to 16:9
*Adjusted auto-crop algorithm
*1080p -> 1440p120 CVT-rb works now


== Version 1.0.4 ==
== Version 1.0.4 ==

Revision as of 02:29, 10 January 2024

This page includes the latest RetroTINK-4K firmware update, as well as all past firmwares if you need them. Use this page to revert back to an older version, or to see a complete list of changes and additions to the RT4K since its release.

Exclamation-circle-fill.svgFor the initial update from the launch firmware, it is recommended to update by pressing and holding the reset button as you insert the USB cord rather than through the menu.


Version 1.0.4

Patch notes:

  • Fixed hidden '.' file bug introduced when using the SD card with Mac OS X.
  • MiSTer DV1 detected and parsed
    • Can be disabled in HDMI RX menu, default on
    • Automatically tunes the crops (if core provides info) and takes control of the decimation factor
    • New HDMI modes entries added for MiSTer DVI (240p, 288p, 480i, 576i and unknown/generic)
    • https://github.com/MiSTer-devel/Main_MiSTer/issues
  • Added 32 kHz audio sample rate detection (diagnostics page needs to be fixed, since it still displays 44.1 kHz)
  • Various FPGA optimizations and added the ability to override DE with DV1 info

Version 1.0.2

Patch notes:

  • Fixed file handler to ignore files/directories that start with '.'
  • Added warning when disabling BFI minimum frame rate limit.
  • Fixed auto-decimation bug with PS1 MiSTer core
    • NOTE: Because MiSTer does not send the correct de-repetition (along with crop) meta data, you will need to manually set it in the HDMI receiver menu.
    • Usually Input Pixels = 4/Output Pixels = 1 is sufficent unless you need 1:1 PAR modes (i.e. emulating LCD) in which case, you will need to figure out the exact number

Version 1.0.1

Patch notes:

  • Fixed SD card read freeze bug due to unexpected read latency/timeouts
  • blizzz's name fixed
  • Option to disable min. BFI rate cop
  • For the initial update from the launch firmware, it is recommended to update by pressing and holding the reset button as you insert the USB cord rather than through the menu.

Version 1.0