PS4:Updating your Firmware: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
Zorua98741 (talk | contribs) m (Removed note about PS3 homebrew?) |
||
| Line 11: | Line 11: | ||
# Select "System Update" and choose "Update via Storage Media". | # Select "System Update" and choose "Update via Storage Media". | ||
# Allow update to install and reboot. | # Allow update to install and reboot. | ||
[[Category:PS4]] | [[Category:PS4]] | ||
Revision as of 04:49, 24 May 2024
In the event that you wish to update your firmware without connecting to PSN, you can update via a USB storage device. Ensure that there is no disk inside of the PS4 when attempting to update the firmware.
Updating the Firmware (Recovery Mode)
- Remove any disks in the Blu-Ray drive and disconnect the console from the Internet.
- Create a folder called "PS4" on the root of your USB storage device.
- Create a folder within the PS4 folder called "UPDATE".
- Place the desired firmware within the UPDATE folder and rename it "PS4UPDATE.PUP".
- Plug your USB storage device into the right-most USB port of your PS4.
- Boot your console into the PS4:Safe Mode by powering it on, holding the power button until it turns off, then holding it again until it does it a quick double-beep.
- Select "System Update" and choose "Update via Storage Media".
- Allow update to install and reboot.