PS2:Video Cables: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
(copy pasta)
(moved)
Line 1: Line 1:
==RF, Composite, S-Video==
==RF, Composite, S-Video, HDMI==
[[PS1:Video_Cables|Same as PlayStation 1.]]
[[PS1:Video_Cables|Same as PlayStation 1.]]
==RGB==
==RGB==
Line 22: Line 22:
* [https://castlemaniagames.com/collections/hd-retrovision/products/hd-retrovision-ps2-3 HD Retrovision] component (YPbPr) cable
* [https://castlemaniagames.com/collections/hd-retrovision/products/hd-retrovision-ps2-3 HD Retrovision] component (YPbPr) cable
* [https://www.retrogamingcables.co.uk/sony-av-accessories/PlayStation-2-3-RGB-SCART-CABLES/SONY-PLAYSTATION-2-3-PS2-PS3-YPbPr-COMPONENT-VIDEO-CABLE-PVM-BVM PACKAPUNCH Cable]
* [https://www.retrogamingcables.co.uk/sony-av-accessories/PlayStation-2-3-RGB-SCART-CABLES/SONY-PLAYSTATION-2-3-PS2-PS3-YPbPr-COMPONENT-VIDEO-CABLE-PVM-BVM PACKAPUNCH Cable]
==HDMI==
While the PS2 does not output HDMI, the RAD2X cables can adapt an RGB signal to HDMI and upscale the image to 480p.
* [https://www.retrogamingcables.co.uk/SONY-PLAYSTATION-HD-RAD2X-CABLE RAD2X Cable]
** This '''does not''' allow you to convert a YPbPr signal to HDMI. This means that the native 480p output through a PS2 will not be compatible, but the upscaling produced by this adapter should produce a similar result.
==AV Multi In (Game)==
==AV Multi In (Game)==
A cable with a PlayStation AV Multi Out connector on both sides, for use with compatible Sony TVs (Japan only?) including the official PS1 TV - the [[CRT:KV-21SP1]].
A cable with a PlayStation AV Multi Out connector on both sides, for use with compatible Sony TVs (Japan only?) including the official PS1 TV - the [[CRT:KV-21SP1]].

Revision as of 11:25, 3 June 2024

RF, Composite, S-Video, HDMI

Same as PlayStation 1.

RGB

Except on the Japanese-launch-exclusive DVD Player 1.0 and third party hacks, RGB mode is artificially incompatible with DVD-Video playing software.

As there is no difference between RGB and YPbPr cables except the attached connectors, they are interchangeable if atypical connectors are desired.

Standard resolution

ED and HD

  • SCPH-10320 (VGA HD-15)
    • Sync on green only.

YPbPr

  • SCPH-10100 (RCA)
  • SCPH-10490 (as above, PS3 branding)
  • SCPH-10330 (D-Terminal)
  • SCPH-10510 (as above, PS3 branding)
  • HD Retrovision component (YPbPr) cable
  • PACKAPUNCH Cable

AV Multi In (Game)

A cable with a PlayStation AV Multi Out connector on both sides, for use with compatible Sony TVs (Japan only?) including the official PS1 TV - the CRT:KV-21SP1.

It's also compatible with the PS2/PS3 (uses the same AV Multi Out), whose YPbPr mode is also supported.

  • VMC-AVM250
Retrieved from "https://consolemods.org/wiki/index.php?title=PS2:Video_Cables&oldid=42967"