Example Page/pt: Difference between revisions
Jump to navigation
Jump to search
(Created page with "v7") |
(Created page with "v8") |
||
| Line 14: | Line 14: | ||
v7 | v7 | ||
v8 | |||
<div lang="en" dir="ltr" class="mw-content-ltr"> | <div lang="en" dir="ltr" class="mw-content-ltr"> | ||
Revision as of 02:37, 21 September 2024
Este é um teste
v2
v3
v4
v5
v6
v7
v8
Mod Installation
Choose an installation method below.
(Option 1) Preserving RF Output
This method is more difficult but preserves RF output.
- Mount mod board at this location (picture).
- Connect wires from here to here.
- Set these jumpers.
(Option 2) Sacrificing RF Output
This method is much easier but removes RF output.
- Mount mod board at this location (picture).
- Connect wires from here to here.
- Set these other jumpers.
- Test the solution by checking XYZ.
Finishing Up
- Clean up with isopropyl alcohol and test it.
- If testing fails then check X, Y, and Z.
- Reassemble the unit.
Usage
- Give usage instructions if necessary.
- Cover any additional options post-install, such as configuration jumpers or software settings.
Troubleshooting and Tips
- List specific tips here or common issues people run into.