Example Page/pt: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
(Created page with "v10")
(Created page with "v11")
Line 20: Line 20:
v10
v10


<div lang="en" dir="ltr" class="mw-content-ltr">
v11
==== (Option 1) Preserving RF Output ====
</div>


<div lang="en" dir="ltr" class="mw-content-ltr">
v12
This method is more difficult but preserves RF output.
</div>


<div lang="en" dir="ltr" class="mw-content-ltr">
v13
# Mount mod board at this location (picture).
# Connect wires from here to here.
# Set these jumpers.
</div>


<div lang="en" dir="ltr" class="mw-content-ltr">
<div lang="en" dir="ltr" class="mw-content-ltr">

Revision as of 02:37, 21 September 2024

Other languages:

Este é um teste

v2

v3

v4

v5

v6

v7

v8

v9

v10

v11

v12

v13

This method is much easier but removes RF output.

  1. Mount mod board at this location (picture).
  2. Connect wires from here to here.
  3. Set these other jumpers.
  4. Test the solution by checking XYZ.

Finishing Up

  1. Clean up with isopropyl alcohol and test it.
  2. If testing fails then check X, Y, and Z.
  3. Reassemble the unit.

Usage

  • Give usage instructions if necessary.
  • Cover any additional options post-install, such as configuration jumpers or software settings.

Troubleshooting and Tips

  • List specific tips here or common issues people run into.