Example Page/pt: Difference between revisions

Latest revision as of 02:37, 21 September 2024

Other languages:

Este é um teste

v2

v3

v4

v5

v6

v7

v8

v9

v10

v11

v12

v13

v14

This method is much easier but removes RF output.

Give usage instructions if necessary.
Cover any additional options post-install, such as configuration jumpers or software settings.

@@ Line 8: / Line 8: @@
 v4
-<div lang="en" dir="ltr" class="mw-content-ltr">
+v5
-== Required Materials ==
-* Tools (T1 screwdriver, Philips screwdriver, soldering iron, etc)
-* Modding products (RGB board, cable adapters, etc)
-* Components (resistors, capacitors, etc)
-* (Optional) Extra things that may make the mod easier or additional pieces you can add onto the mod.
-</div>
-<div lang="en" dir="ltr" class="mw-content-ltr">
+v6
-== Installation ==
-</div>
-<div lang="en" dir="ltr" class="mw-content-ltr">
+v7
-=== Motherboard Preparation ===
-</div>
-<div lang="en" dir="ltr" class="mw-content-ltr">
+v8
-# Disassemble the unit.
-# Remove things from the motherboard.
-# Add things to the motherboard.
-# Bridge these pins.
-</div>
-<div lang="en" dir="ltr" class="mw-content-ltr">
+v9
-=== Mod Installation ===
-</div>
-<div lang="en" dir="ltr" class="mw-content-ltr">
+v10
-Choose an installation method below.
-</div>
-<div lang="en" dir="ltr" class="mw-content-ltr">
+v11
-==== (Option 1) Preserving RF Output ====
-</div>
-<div lang="en" dir="ltr" class="mw-content-ltr">
+v12
-This method is more difficult but preserves RF output.
-</div>
-<div lang="en" dir="ltr" class="mw-content-ltr">
+v13
-# Mount mod board at this location (picture).
-# Connect wires from here to here.
-# Set these jumpers.
-</div>
-<div lang="en" dir="ltr" class="mw-content-ltr">
+v14
-==== (Option 2) Sacrificing RF Output ====
-</div>
 <div lang="en" dir="ltr" class="mw-content-ltr">