PS4:Alternative Methods of Jailbreaking

This page provides:

• A method that allows direct access to the previous DNS method via the Internet Browser and self-hosting.
• A method that will allow you to completely stay offline and create your own host website for your jailbroken PS4.
  • If you later decide to go online follow this PS4:Blocking OFW Updates guide to stop game and firmware updates even if a DNS is not an option for you there are alternatives.

For people who can't access DNS

For some people, their ISP (Internet Provider) will not allow the user to use any DNS thus can't jailbreak the same way as everyone else.

1. On your PS4, open Internet Browser and navigate to either site below and select your firmware version:
   • https://cthugha.exploit.menu/ - Direct link to the expoit site without using a custom DNS.
   • https://kar0218.github.io/ - Another all in one host by Karo.
2. FOR 9.00 ONLY: If you see "Insert USB now", plug in your USB drive that Rufus has flashed, wait until the notification pops and disappears, then press OK. If you see "You're all set", it means you now jailbroken the PS4 (also on FW lower than 9.00 this should appear without a USB drive)
3. Additionally, to block PSN connection like the DNS would have done, you can navigate on your PS4, after jailbreaking, to Debug settings > PlayStation Network > NP Environment, and simply change np value to any other word such as block.

• You now have jailbroken your PS4! 9.00 users, you need to remove the USB after you see the "You're all set!" screen.

Self-hosting

Self-hosting involves cloning a website then running it locally using your PC as the server. If you have DNS ISP problem this most likely wont work.

If your chosen exploit menu supports caching, you only need to host the exploit on your PC the first time, as it will display the cached version going forward.

1. First, find a host you want to clone. For example, Karo's 9.00 and lower JB host.
2. Download and extract or install:
   • XAMPP
   • Python
   • FakeDNS script
3. Run XAMPP and open its control panel. Select Start so that Apache turns green.
4. Open a command prompt and run: ipconfig to find your IP Address (IPv4 Address). Take note of it.
5. Put fakedns.py to the folder C:/Python27/
6. In the same folder create a .txt file and write:
   • A manuals.playstation.net IPADDRESS - replace IPADDRESS with your IP Address you took note of.
7. Save the file and rename it to dns.conf. Make sure its a .conf and NOT a .txt file.
8. Back to command prompt, run the command: fakedns.py -c dns.conf. This will start a fake server.
9. On the PS4, navigate to Settings > Network > Check Connect to the Internet, then Set Up Internet Connection and set:

Connection: Wi-Fi or LAN cable
Set Up: Custom
IP Address: Automatic
DHCP Host Name: Do Not Specify
DNS Settings: Manual
Primary DNS: YOUR IP ADDRESS     - Explanation: This DNS will redirect you to the host.
Secondary DNS: 0.0.0.0
MTU Settings: Automatic
Proxy Server: Do Not Use

10. On your PS4, navigate to Settings > User's Guide/Helpful Info > User Guide. Take note of the address it tries to load. It should appear like this:
• http://manuals.playstation.net/document/region/ps4/index.html - Take note of the region code. Could be "Ca" or "en", "eu" etc.
11. Back on the PS4, go to C:/XAMPP/htdocs/. Create folders that will copy the website structure before noted. It should look like this.
• C:/XAMPP/htdocs/document/region/ps4/ - again replace region with your own region code.
12. In the final PS4 folder copy and paste the host cloned before (no archive).
13. Back on the PS4, navigate to Settings > User's Guide/Helpful Info > User Guide and the new host should now load.
14. Select firmware and jailbreak using GoldHEN.