Xbox 360:XFlasher 360: Difference between revisions
Jump to navigation
Jump to search
(Created page with "The [https://themodshop.co/shop/xflasher.html xFlasher 360] is a device created by Element18592 (TheModShop.co) used to read/write to Xbox 360 NANDs and program glitch chips....") |
No edit summary |
||
| (13 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
The [https://themodshop.co/shop/xflasher.html xFlasher 360] is a device created by Element18592 (TheModShop.co) used to read/write to Xbox 360 NANDs and program glitch chips. It works in conjunction with the Windows program [https:// | <languages/><translate> | ||
<!--T:1--> | |||
[[Category:Xbox 360]] | |||
The [https://themodshop.co/shop/xflasher.html xFlasher 360] is a device created by Element18592 (TheModShop.co) used to read/write to Xbox 360 NANDs and program glitch chips. It works in conjunction with the Windows program [https://github.com/Octal450/J-Runner-with-Extras/releases/latest J-Runner with Extras] and can be used for JTAG and RGH installs. It is the fastest NAND programmer and achieves speeds up to 3x faster than the NAND-X. | |||
Drivers can be | <!--T:2--> | ||
Drivers can be [[Media:XFlasher Driver Setup.zip|downloaded directly]] or found in J-Runner with Extras by plugging in your xFlasher and clicking the xFlasher menu and "Install Drivers". The official user guide can be found [https://themodshop.co/xFlasher_360_User_Guide_V1.0.pdf on TheModShop.co] ([[:File:XFlasher_360_User_Guide.pdf|mirror]]). | |||
<!--T:3--> | |||
A setup video can be found on [https://www.youtube.com/watch?v=YpUpFxF9bQI Octal450’s YouTube channel]. | A setup video can be found on [https://www.youtube.com/watch?v=YpUpFxF9bQI Octal450’s YouTube channel]. | ||
==Switch Usage== <!--T:4--> | |||
==Switch Usage== | |||
There are two possible positions for the switch on the xFlasher: | There are two possible positions for the switch on the xFlasher: | ||
<!--T:5--> | |||
* `SPI`: For 16/256/512MB NANDs, programming glitch chips and UART monitoring. | |||
* `eMMC`: For reading and flashing 4GB NANDs. | * `eMMC`: For reading and flashing 4GB NANDs. | ||
==Updating Glitch Chip Timing File== | ==Updating Glitch Chip Timing File== <!--T:6--> | ||
# Plug in console power | # Plug in console power '''but do not turn it on'''. | ||
# Set the switch to SPI if not set to that already. | # Set the switch to SPI if not set to that already. | ||
# Plug in the | # Plug in the xFlasher to your computer via the mini USB cable and plug in the glitch chip using the glitch chip programming cables. | ||
# Launch J-Runner, select Advanced > `Custom NAND/Timing File Functions`, then choose your | # Launch J-Runner, select Advanced > `Custom NAND/Timing File Functions`, then choose your SVF file, and start. | ||
==Troubleshooting== | ==Troubleshooting== <!--T:7--> | ||
* Verify all solder points are well done and not bridged. If unsure or think it is badly done, reflow the solder. | * Verify all solder points are well done and not bridged. If unsure or think it is badly done, reflow the solder. | ||
* Try running J-Runner as Administrator (Right click J-Runner > Run as Administrator). | * Try running J-Runner as Administrator (Right click J-Runner > Run as Administrator). | ||
</translate> | |||
Latest revision as of 16:20, 4 November 2024
The xFlasher 360 is a device created by Element18592 (TheModShop.co) used to read/write to Xbox 360 NANDs and program glitch chips. It works in conjunction with the Windows program J-Runner with Extras and can be used for JTAG and RGH installs. It is the fastest NAND programmer and achieves speeds up to 3x faster than the NAND-X.
Drivers can be downloaded directly or found in J-Runner with Extras by plugging in your xFlasher and clicking the xFlasher menu and "Install Drivers". The official user guide can be found on TheModShop.co (mirror).
A setup video can be found on Octal450’s YouTube channel.
Switch Usage
There are two possible positions for the switch on the xFlasher:
SPI: For 16/256/512MB NANDs, programming glitch chips and UART monitoring.eMMC: For reading and flashing 4GB NANDs.
Updating Glitch Chip Timing File
- Plug in console power but do not turn it on.
- Set the switch to SPI if not set to that already.
- Plug in the xFlasher to your computer via the mini USB cable and plug in the glitch chip using the glitch chip programming cables.
- Launch J-Runner, select Advanced >
Custom NAND/Timing File Functions, then choose your SVF file, and start.
Troubleshooting
- Verify all solder points are well done and not bridged. If unsure or think it is badly done, reflow the solder.
- Try running J-Runner as Administrator (Right click J-Runner > Run as Administrator).