Xbox 360:XFlasher 360: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (Text replacement - "Category:Xbox360" to "Category:Xbox 360") |
||
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
<languages/><translate> | <languages/><translate> | ||
[[Category: | <!--T:1--> | ||
[[Category:Xbox 360]] | |||
The [https://themodshop.co/shop/xflasher.html xFlasher 360] is a device created by Element18592 (TheModShop.co) used to read/write to Xbox 360 NANDs and program glitch chips. It works in conjunction with the Windows program [https://github.com/Octal450/J-Runner-with-Extras/releases/latest J-Runner with Extras] and can be used for JTAG and RGH installs. It is the fastest NAND programmer and achieves speeds up to 3x faster than the NAND-X. | The [https://themodshop.co/shop/xflasher.html xFlasher 360] is a device created by Element18592 (TheModShop.co) used to read/write to Xbox 360 NANDs and program glitch chips. It works in conjunction with the Windows program [https://github.com/Octal450/J-Runner-with-Extras/releases/latest J-Runner with Extras] and can be used for JTAG and RGH installs. It is the fastest NAND programmer and achieves speeds up to 3x faster than the NAND-X. | ||
<!--T:2--> | |||
Drivers can be [[Media:XFlasher Driver Setup.zip|downloaded directly]] or found in J-Runner with Extras by plugging in your xFlasher and clicking the xFlasher menu and "Install Drivers". The official user guide can be found [https://themodshop.co/xFlasher_360_User_Guide_V1.0.pdf on TheModShop.co]. | Drivers can be [[Media:XFlasher Driver Setup.zip|downloaded directly]] or found in J-Runner with Extras by plugging in your xFlasher and clicking the xFlasher menu and "Install Drivers". The official user guide can be found [https://themodshop.co/xFlasher_360_User_Guide_V1.0.pdf on TheModShop.co]. | ||
<!--T:3--> | |||
A setup video can be found on [https://www.youtube.com/watch?v=YpUpFxF9bQI Octal450’s YouTube channel]. | A setup video can be found on [https://www.youtube.com/watch?v=YpUpFxF9bQI Octal450’s YouTube channel]. | ||
==Switch Usage== | ==Switch Usage== <!--T:4--> | ||
There are two possible positions for the switch on the xFlasher: | There are two possible positions for the switch on the xFlasher: | ||
<!--T:5--> | |||
* `SPI`: For 16/256/512MB NANDs, programming glitch chips and UART monitoring. | * `SPI`: For 16/256/512MB NANDs, programming glitch chips and UART monitoring. | ||
* `eMMC`: For reading and flashing 4GB NANDs. | * `eMMC`: For reading and flashing 4GB NANDs. | ||
==Updating Glitch Chip Timing File== | ==Updating Glitch Chip Timing File== <!--T:6--> | ||
# Plug in console power '''but do not turn it on'''. | # Plug in console power '''but do not turn it on'''. | ||
# Set the switch to SPI if not set to that already. | # Set the switch to SPI if not set to that already. | ||
Line 19: | Line 23: | ||
# Launch J-Runner, select Advanced > `Custom NAND/Timing File Functions`, then choose your SVF file, and start. | # Launch J-Runner, select Advanced > `Custom NAND/Timing File Functions`, then choose your SVF file, and start. | ||
==Troubleshooting== | ==Troubleshooting== <!--T:7--> | ||
* Verify all solder points are well done and not bridged. If unsure or think it is badly done, reflow the solder. | * Verify all solder points are well done and not bridged. If unsure or think it is badly done, reflow the solder. | ||
* Try running J-Runner as Administrator (Right click J-Runner > Run as Administrator). | * Try running J-Runner as Administrator (Right click J-Runner > Run as Administrator). | ||
</translate> | </translate> |
Latest revision as of 20:19, 4 September 2024
The xFlasher 360 is a device created by Element18592 (TheModShop.co) used to read/write to Xbox 360 NANDs and program glitch chips. It works in conjunction with the Windows program J-Runner with Extras and can be used for JTAG and RGH installs. It is the fastest NAND programmer and achieves speeds up to 3x faster than the NAND-X.
Drivers can be downloaded directly or found in J-Runner with Extras by plugging in your xFlasher and clicking the xFlasher menu and "Install Drivers". The official user guide can be found on TheModShop.co.
A setup video can be found on Octal450’s YouTube channel.
Switch Usage
There are two possible positions for the switch on the xFlasher:
SPI
: For 16/256/512MB NANDs, programming glitch chips and UART monitoring.eMMC
: For reading and flashing 4GB NANDs.
Updating Glitch Chip Timing File
- Plug in console power but do not turn it on.
- Set the switch to SPI if not set to that already.
- Plug in the xFlasher to your computer via the mini USB cable and plug in the glitch chip using the glitch chip programming cables.
- Launch J-Runner, select Advanced >
Custom NAND/Timing File Functions
, then choose your SVF file, and start.
Troubleshooting
- Verify all solder points are well done and not bridged. If unsure or think it is badly done, reflow the solder.
- Try running J-Runner as Administrator (Right click J-Runner > Run as Administrator).