Game Gear:Game Gear Model Differences: Difference between revisions
| (13 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Although the basic design of the Game Gear remained largely the same during its lifespan, there are a number of different revisions which range from simple cosmetic differences to redesigned internals. | Although the basic design of the Game Gear remained largely the same during its lifespan, there are a number of different revisions which range from simple cosmetic differences to redesigned internals. Note that all Game Gear games and almost all Game Gear accessories are compatible across all revisions. | ||
== Board Revisions == | == Board Revisions == | ||
| Line 13: | Line 13: | ||
=== VA1 (1992-1996, All Regions) === | === VA1 (1992-1996, All Regions) === | ||
Commonly known as the "single ASIC" board, the VA1 was gradually introduced for all regions during 1992 and totally replaced the VA0 by 1993. In this revision, the Z80, VDP and SCA were combined into a single ASIC (315-5535), reducing production costs. This was the final board revision for Europe and Japan, and was the last to use the Citizen UC-320 LCD. | |||
VA1 boards began being phased in with the following serial numbers:<ref>https://consolemods.org/wiki/images/2/24/Game_Gear_VA1_Service_Manual.pdf</ref> | VA1 boards began being phased in with the following serial numbers:<ref>https://consolemods.org/wiki/images/2/24/Game_Gear_VA1_Service_Manual.pdf</ref> | ||
| Line 31: | Line 31: | ||
* 837-9130 (Europe) | * 837-9130 (Europe) | ||
=== VA4 (1993- | === VA4 (1993-1996, North America) === | ||
This unusual revision only appeared in North American systems and uses a different ASIC (315-5682) than the VA1. Some components, namely the audio preamp and video RAM, were | {|style="margin: 0 auto;" | ||
| [[Image:GGVA4Front.jpg|upright|350px|]] | |||
| [[Image:GGVA4Back.jpg|upright|350px]] | |||
|} | |||
This unusual revision only appeared in North American systems and uses a different ASIC (315-5682) than the VA1. Some components, namely the audio preamp and video RAM, were relocated to the front of the board. The components for the backlight were also moved over to the other side, including the 34V transformer. Unusually, the main board uses three different types of electrolytic capacitors. Most are of the now-obsolete chip package used in all Game Gears, while a handful are conventional SMD capacitors and one is through-hole, making it the only Game Gear revision to use through-hole capacitors outside of the power board. | |||
Sega also changed the connectors for the power and sound PCBs from AMP CT ones to the more common JST PH type, meaning that power and sound boards from the VA0 and VA1 cannot be used on a VA4 without modification. Some VA4s also have a unique power board which incorporates a 10 uF SMD electrolytic capacitor in addition to the three through-hole capacitors. | |||
Game Gears with this board will have the model number '''2110K'''. | The LCD used in the VA4 is completely different than the VA0 and VA1, with three separate cables (one for each driver IC) at the bottom and two smaller ribbon cables coming from the right-hand side of the screen. Screen replacements intended for the VA0 and VA1 are not compatible. In addition, the VA4's LCD has very thin and fragile wires connecting the ribbon cables to the motherboard, and if care is not taken during repairs or modifications, these wires can break and create missing lines in the display. | ||
Game Gears with this board will always have the model number '''2110K''', while ones manufactured in 1993 and 1994 have "3" as the third digit in the serial number. | |||
====Board Part Numbers==== | |||
* 837-9537 | |||
* 837-9537-01 (nearly identical to the 837-9537 but has an extra 100 uF 6.3V capacitor as part of the backlight circuit) | |||
=== VA5 / 171-7923A (1994-1996 and 2001, North America) === | === VA5 / 171-7923A (1994-1996 and 2001, North America) === | ||
On this revision, the audio preamp and video RAM were moved back to the rear of the board and the LCD was changed again, this time | On this revision, the audio preamp and video RAM were moved back to the rear of the board and the backlight circuitry was relocated to the same side as VA0/VA1 boards. The LCD was changed again, this time connected with a single large ribbon cable as on the VA0 and VA1. Despite this, the LCD is completely different to previous revisions and the VA5 is still incompatible with screen mods intended for the VA0 and VA1. Like the VA4, Sega used JST PH connectors for the power and sound PCBs, so boards from the VA0 and VA1 are still not compatible without modification. The VA5 also uses the 315-5682 ASIC from the VA4. | ||
Majesco Game Gears (detailed below) used a slight variant of the VA5 known as the 171-7923A. All Game Gears with a VA5 board, including Majesco units, have the model number '''2110G'''. | Majesco Game Gears (detailed below) used a slight variant of the VA5 known as the 171-7923A. All Game Gears with a VA5 board, including Majesco units, have the model number '''2110G'''. Original Sega VA5s will also have a "4" as the third digit of the serial number. | ||
====Board Part Numbers==== | |||
* 837-10766 (Sega) | |||
* 171-7923A (Majesco) | |||
== Cosmetic Differences == | == Cosmetic Differences == | ||
| Line 52: | Line 69: | ||
====North America==== | ====North America==== | ||
The North American market received a unique blue variant in 1994, which was only available in special bundles with either ''The Lion King''<ref>https://segaretro.org/File:GG_US_Box_Front_LionKing.jpg</ref> or ''World Series Baseball''<ref>https://segaretro.org/File:GG_US_Box_Front_SegaSports.jpg</ref>. This was the only color other than black available outside Japan. | The North American market received a unique blue variant in 1994, which was only available in special bundles with either ''The Lion King''<ref>https://segaretro.org/File:GG_US_Box_Front_LionKing.jpg</ref> or ''World Series Baseball''<ref>https://segaretro.org/File:GG_US_Box_Front_SegaSports.jpg</ref>. This was the only color other than black available outside Japan, and was seemingly only available for one year. | ||
===Conductive Paint=== | ===Conductive Paint=== | ||
| Line 61: | Line 78: | ||
=== Screen Lens === | === Screen Lens === | ||
Early Game Gears in all regions have a completely flat screen lens, which despite its appearance is made of plastic. During 1991 and 1992, a curved "bubble" lens began being phased in, and this is the type of lens found on most Game Gears. The lens can also be used as a very rough way to determine if a system has a VA0 or a later board; systems with a flat lens (assuming it has not been replaced with an aftermarket one) will always have a VA0 board, though some older systems with a bubble lens will also have a VA0 board. | |||
[[File:GGCurvedVsFlat01.jpg|x200px]] | [[File:GGCurvedVsFlat01.jpg|x200px]] | ||
| Line 67: | Line 84: | ||
=== TMSS === | === TMSS === | ||
During the VA1's production run, Sega began implementing [https://segaretro.org/TradeMark_Security_System TradeMark Security System] functionality, presumably in an attempt to deter unlicensed games as Sega had previously done with the [[Genesis:Genesis Mods Wiki|Genesis/Mega Drive]]. Although the TMSS ROM was always part of the VA1's ASIC, Sega did not start implementing it until 1993 | During the VA1's production run, Sega began implementing [https://segaretro.org/TradeMark_Security_System TradeMark Security System] functionality, presumably in an attempt to deter unlicensed games as Sega had previously done with the [[Genesis:Genesis Mods Wiki|Genesis/Mega Drive]]. Although the TMSS ROM was always part of the VA1's ASIC, Sega did not start implementing it until 1993. Most European Game Gears with TMSS also have a different model number, MK-2110-50 instead of 2110-50. TMSS is also present on the VA4 and VA5 board revisions. When it comes to officially licensed cartridges, the presence of TMSS does not cause any game compatibility issues on the Game Gear as it did with the Genesis/Mega Drive. | ||
On all applicable board revisions, the TMSS screen can be disabled by shorting "J1" on the motherboard, and Sega did install a 0 ohm jumper at this location for VA1 units that did not have TMSS.<ref>https://www.smspower.org/forums/10048-GG1ASICBiosSkipModJustBridgeJ1</ref> | On all applicable board revisions, the TMSS screen can be disabled by shorting "J1" on the motherboard, and Sega did install a 0 ohm jumper at this location for VA1 units that did not have TMSS.<ref>https://www.smspower.org/forums/10048-GG1ASICBiosSkipModJustBridgeJ1</ref> | ||
| Line 78: | Line 95: | ||
=== Majesco Game Gear === | === Majesco Game Gear === | ||
US-based distributor Majesco rereleased the Game Gear in early 2001, several years after Sega had officially discontinued the system. It was sold for US$29.99<ref>http://www.gamesasylum.com/2014/07/18/majesco-and-the-sega-game-gears-second-lease-of-life/</ref> at Toys 'R Us, Amazon, and discount retailers such as Ames<ref>https://dcemulation.org/phpBB/viewtopic.php?style=1&p=14644&sid=d389f39527363a4f76941b7518422dc3#p14644</ref> and Kmart. These units have a number of cosmetic differences, the most notable being the monochrome ovals on the screen lens (these are tricolored on original run units). The shell is more of a jet black color, the power switch is also black instead of red, the Start button has more of a purplish tinge, and both the serial and model number labels are made of white paper instead of foil. All Majesco units have the 171-7923A board revision, which is incompatible with the TV Tuner. Majesco units are generally less susceptible to capacitor leakage, but they are not immune to this common issue and it is still recommended to recap these systems regardless. | US-based distributor Majesco rereleased the Game Gear in early 2001, several years after Sega had officially discontinued the system. It was sold for US$29.99<ref>http://www.gamesasylum.com/2014/07/18/majesco-and-the-sega-game-gears-second-lease-of-life/</ref> at Toys 'R Us, Amazon, and discount retailers such as Ames<ref>https://dcemulation.org/phpBB/viewtopic.php?style=1&p=14644&sid=d389f39527363a4f76941b7518422dc3#p14644</ref> and Kmart. These units have a number of cosmetic differences, the most notable being the monochrome ovals on the screen lens (these are tricolored on original run units). The shell is more of a jet black color, the power switch is also black instead of red, the Start button has more of a purplish tinge, and both the serial and model number labels are made of white paper instead of foil. In addition, the threaded hole on the back for securing accessories like the Super Wide Gear and Master Gear Converter is filled in. | ||
All Majesco units have the 171-7923A board revision, which is incompatible with the TV Tuner. Majesco units are generally less susceptible to capacitor leakage, but they are not immune to this common issue and it is still recommended to recap these systems regardless. | |||
An interesting curiosity regarding the Majesco Game Gear is that it is set to the Japanese region setting for Master System games, but Game Gear games behave as they do on an American or European system. | An interesting curiosity regarding the Majesco Game Gear is that it is set to the Japanese region setting for Master System games, but Game Gear games behave as they do on an American or European system. | ||
Latest revision as of 21:37, 20 October 2024
Although the basic design of the Game Gear remained largely the same during its lifespan, there are a number of different revisions which range from simple cosmetic differences to redesigned internals. Note that all Game Gear games and almost all Game Gear accessories are compatible across all revisions.
Board Revisions
VA0 (1990-1993, All Regions)
This is the initial board revision of the Game Gear, and is often known as the "twin ASIC" version as it is the only Game Gear revision to have a separate VDP (Video Display Processor) and SCA (Standard Cell Array), which are two SMD chips located near the speaker. It is also the only Game Gear revision to have a discrete Z80 CPU.
Board Part Numbers
- 837-7398-0x (Japan)
- 837-7719-0x (US)
- 837-7996 (Europe)
VA1 (1992-1996, All Regions)
Commonly known as the "single ASIC" board, the VA1 was gradually introduced for all regions during 1992 and totally replaced the VA0 by 1993. In this revision, the Z80, VDP and SCA were combined into a single ASIC (315-5535), reducing production costs. This was the final board revision for Europe and Japan, and was the last to use the Citizen UC-320 LCD.
VA1 boards began being phased in with the following serial numbers:[1]
- 020019501 (Europe)
- 020168498 (Canada)
- 020176537 (US)
- B20135204 (North America)
- B30000001 (Europe)
- K20117921 (North America)
- K37000001 (Europe)
- P31000001 (North America)
- P31020001 (Europe)
Board Part Numbers
- 837-8560 (Japan)
- 837-9024 (North America)
- 837-9130 (Europe)
VA4 (1993-1996, North America)
|
|
This unusual revision only appeared in North American systems and uses a different ASIC (315-5682) than the VA1. Some components, namely the audio preamp and video RAM, were relocated to the front of the board. The components for the backlight were also moved over to the other side, including the 34V transformer. Unusually, the main board uses three different types of electrolytic capacitors. Most are of the now-obsolete chip package used in all Game Gears, while a handful are conventional SMD capacitors and one is through-hole, making it the only Game Gear revision to use through-hole capacitors outside of the power board.
Sega also changed the connectors for the power and sound PCBs from AMP CT ones to the more common JST PH type, meaning that power and sound boards from the VA0 and VA1 cannot be used on a VA4 without modification. Some VA4s also have a unique power board which incorporates a 10 uF SMD electrolytic capacitor in addition to the three through-hole capacitors.
The LCD used in the VA4 is completely different than the VA0 and VA1, with three separate cables (one for each driver IC) at the bottom and two smaller ribbon cables coming from the right-hand side of the screen. Screen replacements intended for the VA0 and VA1 are not compatible. In addition, the VA4's LCD has very thin and fragile wires connecting the ribbon cables to the motherboard, and if care is not taken during repairs or modifications, these wires can break and create missing lines in the display.
Game Gears with this board will always have the model number 2110K, while ones manufactured in 1993 and 1994 have "3" as the third digit in the serial number.
Board Part Numbers
- 837-9537
- 837-9537-01 (nearly identical to the 837-9537 but has an extra 100 uF 6.3V capacitor as part of the backlight circuit)
VA5 / 171-7923A (1994-1996 and 2001, North America)
On this revision, the audio preamp and video RAM were moved back to the rear of the board and the backlight circuitry was relocated to the same side as VA0/VA1 boards. The LCD was changed again, this time connected with a single large ribbon cable as on the VA0 and VA1. Despite this, the LCD is completely different to previous revisions and the VA5 is still incompatible with screen mods intended for the VA0 and VA1. Like the VA4, Sega used JST PH connectors for the power and sound PCBs, so boards from the VA0 and VA1 are still not compatible without modification. The VA5 also uses the 315-5682 ASIC from the VA4.
Majesco Game Gears (detailed below) used a slight variant of the VA5 known as the 171-7923A. All Game Gears with a VA5 board, including Majesco units, have the model number 2110G. Original Sega VA5s will also have a "4" as the third digit of the serial number.
Board Part Numbers
- 837-10766 (Sega)
- 171-7923A (Majesco)
Cosmetic Differences
Colorways
Although the vast majority of Game Gear units are a dark gray/black color, Sega did offer the Game Gear in different colors for both the Japanese and North American markets.
Japan
In Japan, the first color other than black to be offered was a limited edition white version in 1991. This system came bundled with a matching TV Tuner and hardshell carrying case, and reportedly only about 10,000 units were manufactured.[2] Later in 1994, Sega began selling the Game Gear in multiple colors, including light blue, red, yellow and smoke (clear black). The red variant was also the basis for special Coca-Cola[3] and Magic Knight Rayearth[4] themed bundles, with the respective logo for each license printed on the front shell.
By early 1996, Sega handed off marketing and distribution of the Game Gear in Japan to its toy division, who began marketing the system to a younger audience. A special "Kid's Gear" version of the system was released on March 29, 1996, which featured a unique front shell silkscreened with artwork of Akira from the anime adaptation of Virtua Fighter.[5] This system also came bundled with Virtua Fighter Mini and was the last Game Gear variant sold in Japan.
North America
The North American market received a unique blue variant in 1994, which was only available in special bundles with either The Lion King[6] or World Series Baseball[7]. This was the only color other than black available outside Japan, and was seemingly only available for one year.
Conductive Paint
On North American and European systems, the inside of the shell was coated with conductive paint in order to reduce EMI. Earlier units have an aluminized coating while later systems use a brown-colored or dark gray paint instead. Japanese systems have bare plastic on the inside and do not have conductive paint.
AC Adapters
European and Japanese systems use the same tip negative AC adapter as the Master System and model 1 Genesis/Mega Drive, while US systems use the same tip positive EIAJ-03 AC adapter as the model 2 Genesis/Mega Drive.
Screen Lens
Early Game Gears in all regions have a completely flat screen lens, which despite its appearance is made of plastic. During 1991 and 1992, a curved "bubble" lens began being phased in, and this is the type of lens found on most Game Gears. The lens can also be used as a very rough way to determine if a system has a VA0 or a later board; systems with a flat lens (assuming it has not been replaced with an aftermarket one) will always have a VA0 board, though some older systems with a bubble lens will also have a VA0 board.
TMSS
During the VA1's production run, Sega began implementing TradeMark Security System functionality, presumably in an attempt to deter unlicensed games as Sega had previously done with the Genesis/Mega Drive. Although the TMSS ROM was always part of the VA1's ASIC, Sega did not start implementing it until 1993. Most European Game Gears with TMSS also have a different model number, MK-2110-50 instead of 2110-50. TMSS is also present on the VA4 and VA5 board revisions. When it comes to officially licensed cartridges, the presence of TMSS does not cause any game compatibility issues on the Game Gear as it did with the Genesis/Mega Drive.
On all applicable board revisions, the TMSS screen can be disabled by shorting "J1" on the motherboard, and Sega did install a 0 ohm jumper at this location for VA1 units that did not have TMSS.[8]
Majesco Game Gear
US-based distributor Majesco rereleased the Game Gear in early 2001, several years after Sega had officially discontinued the system. It was sold for US$29.99[9] at Toys 'R Us, Amazon, and discount retailers such as Ames[10] and Kmart. These units have a number of cosmetic differences, the most notable being the monochrome ovals on the screen lens (these are tricolored on original run units). The shell is more of a jet black color, the power switch is also black instead of red, the Start button has more of a purplish tinge, and both the serial and model number labels are made of white paper instead of foil. In addition, the threaded hole on the back for securing accessories like the Super Wide Gear and Master Gear Converter is filled in.
All Majesco units have the 171-7923A board revision, which is incompatible with the TV Tuner. Majesco units are generally less susceptible to capacitor leakage, but they are not immune to this common issue and it is still recommended to recap these systems regardless.
An interesting curiosity regarding the Majesco Game Gear is that it is set to the Japanese region setting for Master System games, but Game Gear games behave as they do on an American or European system.
Links
https://segaretro.org/Sega_Game_Gear
https://en.wikipedia.org/wiki/Game_Gear
https://www.retrorgb.com/gamegearversions.html
https://console5.com/techwiki/index.php?title=Game_Gear
References
- ↑ https://consolemods.org/wiki/images/2/24/Game_Gear_VA1_Service_Manual.pdf
- ↑ https://segaretro.org/Game_Gear_consoles_in_Japan
- ↑ https://segaretro.org/File:CocaColaGameGear_JP_box_front.jpg
- ↑ https://segaretro.org/File:GG_MKR_JP_Box_Front.jpg
- ↑ https://www.sega.jp/history/hard/gamegear/devices.html
- ↑ https://segaretro.org/File:GG_US_Box_Front_LionKing.jpg
- ↑ https://segaretro.org/File:GG_US_Box_Front_SegaSports.jpg
- ↑ https://www.smspower.org/forums/10048-GG1ASICBiosSkipModJustBridgeJ1
- ↑ http://www.gamesasylum.com/2014/07/18/majesco-and-the-sega-game-gears-second-lease-of-life/
- ↑ https://dcemulation.org/phpBB/viewtopic.php?style=1&p=14644&sid=d389f39527363a4f76941b7518422dc3#p14644