Saturn:Super Prologue 21 Model SKC-3000: Difference between revisions
Cyo.the.vile (talk | contribs) |
Cyo.the.vile (talk | contribs) No edit summary |
||
Line 1: | Line 1: | ||
== Super Prologue 21 Recommended Maintenance == | == Super Prologue 21 Recommended Maintenance == | ||
Super Prologue 21 is a Saturn built into a Kareoke machine with a VA0 Saturn motherboard. | Super Prologue 21 is a Saturn built into a Kareoke machine with a VA0 Saturn motherboard. | ||
This is for SKC-3000 Prologue 21. Please make sure the rear data plate has this exact model number as there are a few revisions. | |||
Revision as of 23:39, 21 June 2022
Super Prologue 21 Recommended Maintenance
Super Prologue 21 is a Saturn built into a Kareoke machine with a VA0 Saturn motherboard.
This is for SKC-3000 Prologue 21. Please make sure the rear data plate has this exact model number as there are a few revisions.
There is a messy wiring harness system inside the Prologue unit with total disassembly required to access the CD-ROM drive which is a common failure point. It is recommended to take photos on your phone overdocumenting your disassembly process in order to reduce pain in reassembly. It is also recommended to unplug, from wiring harnesses, ONE card at a time for recapping and then connecting the wiring system back to the card. Rinse and repeat.
Main motherboard is a normal VA0 Saturn motherboard with modification to the cartridge slot; the cartridge slot is modified to accomodate the kareoke scsi card subsystem. FRAM modification can be applied. However a region free bios replacement is not recommended as the Saturn uses a unique EEPROM module compared to standard VA0-VA0.5 Saturn motherboards. Unless the Specific Kareoke BIOS EEPROM is region patched do NOT place a regular region free EEPROM in the socket.
Roland 01-HR-SE Harmony Board
Should have a Sega logo somewhere along with "SKZ-0001 835-12275".
For this card you can use through hole capacitors fine provided they're pushed downward and position strategically.
Capacitor | Microfarad | Voltage |
---|---|---|
C13 | 100uf | 6v SMD |
C14 | 100UF | 6V SMD |
C7 | 100UF | 6V SMD |
C100 | 10UF | 16V SMD |
C64 | 10UF | 16V SMD |
C51 | 10UF | 25V |
C98 | 10UF | 25V |
C48 | 10UF | 16V SMD |
C97 | 1UF | 50V SMD |
C96 | 1UF | 50V SMD |
C26 | 10UF | 16V SMD |
C62 | 10UF | 25V |
C66 | 10UF | 25V |
C63 | 10UF | 25V |
C71 | 100UF | 6V SMD |
C74 | 10UF | 16V SMD |
C35 | 10UF | 16V SMD |
C36 | 10UF | 16V SMD |
C54 | 10UF | 25V |
C55 | 10UF | 25V |
C32 | 10UF | 25V |
C94 | 10UF | 25V |
C52 | 10UF | 16V SMD |
C39 | 10UF | 16V SMD |
C85 | 10UF | 16V SMD |
C88 | 10UF | 16V |
C3 | 1UF | 50V SMD |
Denon GU-2824-3 I/O Unit
Capacitor | Microfarad | Voltage |
---|---|---|
C465 | 100uf | 10v |
C506 | 100UF | 6.3V |
C451 | 330UF | 6.3V |
C502 | 100UF | 16V |
C457 | 2.2UF | 50V |