AV:RetroTINK-5X Pro: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
Line 259: Line 259:
! Bob + CRT Simulate
! Bob + CRT Simulate
! Bob + Pre-Deint. + Scanlines
! Bob + Pre-Deint. + Scanlines
! Bob + CRT Simulate + Scanlines
! Bob + CRT Sim. + Scanlines
|-
|-
| [[File:480i-bob-crt-simulate.webm|gif]]
| [[File:480i-bob-crt-simulate.webm|gif]]

Revision as of 08:46, 6 June 2022

RetroTink 5X Pro as shown at www.retrotink.com

The RetroTINK-5X Pro is an advanced video upscaler designed by Mike Chi. It is the latest offering from the RetroTink line of graphics upscalers and line-doublers.

How To Use The RetroTINK-5X Pro - A Beginner’s Guide

The RetroTINK-5X Pro is a product designed to solve the problem of using retro video game consoles with modern flat panel displays. If you’ve arrived at this guide, you’re probably aware of some problems when trying to play older video game systems on a newer TV's.

HDMI vs Analog

In many situations, the cables that came with your game system will not be compatible with the modern digital HDMI inputs on your TV. One of the main features of the RetroTINK-5X Pro is to convert these signals into an HDMI format your modern display can understand.

Correct Image Processing

In the cases that your display does have the correct hook ups to connect your console, there’s still a good chance that the resulting output will be blurry, distorted and laggy. This is because most displays are designed with video content in mind, and the video processing used to handle video isn’t a good fit for retro consoles. Features like minimal and consistent latency, integer scaling and proper handling of 240p are almost always missing when using a flat panel’s included analog inputs.

Lag

The RetroTINK-5X Pro by design is an extremely low lag device, and includes advanced modes to operate even more quickly (with trade offs to other features, see Triple Buffer vs Frame Lock Mode and 1080p (Min-Lag) for more info).

lag (aka latency) is the measurement of the time between a controller button input to when the action is shown on screen. Every electronic device takes a little bit of time to do its job. In the context of gaming, this includes the controller itself, the video game console, any upscalers or splitters in the signal chain, and the display. Having too much lag in a setup can make gameplay feel sluggish, unresponsive, and in extreme cases unplayable. This is why enthusiasts seek devices (controllers, displays, upscalers, etc.) that minimize latency. Devices that do their job as quickly as possible are often referred to as "low lag" or "virtually no lag".

when seeking products that are low latency, it's helpful to know that anything less than a frame in a 60fps signal is colloquially considered very low lag. Often milliseconds (ms) are used to measure lag. 1 frame of a standard 60fps signal is equal to approximately 16.7ms.

Just Play the Damn Game™

Thanks to Mike Chi’s research and engineering, the RetroTINK-5X Pro is one of the best products on the market specifically built to address the peculiarities of retro video game analog signals. While a complex engine of tweakability lies under the hood for enthusiasts, the RetroTINK-5X Pro prioritizes ease of use so anyone can get their console up in running.

Here are the basic steps anyone can take to get a great experience with their retro video game console:

  1. Connect the RetroTINK-5X Pro to your display using an HDMI cable.
  2. Connect your video game console’s video and audio to the RetroTINK-5X Pro using a supported cable.
  3. Power on the RetroTINK-5X Pro using the included MicroUSB cable - many TV’s will have a USB hookup on the back that will work as a power source.
  4. Using the included remote, select the appropriate input from the Input Source menu. (This choice depends on the cable you are using to connect your video game console to the RetroTINK-5X Pro, see Supported Inputs section for more information).
  5. Using the included remote, select the appropriate output from the Output Res. menu. (For most TV’s, 1080p (Fill) is a great “all around” choice.)

And that’s it! You don’t have to be an A/V engineer to get remarkable results from the RetroTINK-5X Pro, all the hard work is done behind the scenes. Understanding jargon such as automatic phase detection, polyphase scaling or motion adaptive deinterlacing isn’t required for you to gain the benefits and enjoy your retro consoles on a flat panel with great results.

Supported Inputs

The Tink 5x supports nearly every major analog video format used by retro video game consoles. Please see the Inputs Source section for more information about supported resolutions and modes.

Composite

Composite Video with Audio RCA Connectors

This is the “standard yellow video cable” most people are familiar with. Composite video cables were found on consoles ranging from the NES all the way through the Xbox 360 / PS3 era of gaming.

To use composite video: plug your cable’s video RCA plug (typically yellow in color) into the Tink 5x’s “Y” labeled input, and your left and right audio into the “L” and “R” inputs respectively. Then, select Composite from the Tink 5x’s Input Source menu.

SCART-CV

The Tink 5x supports composite input over the SCART connector input. SCART was not widely used in the United States but was common in Europe, and video game consoles sometimes featured composite video and audio connections over SCART.

Note that S-Video (Y/C) video formats are not accepted through the SCART connector input.

To use SCART-CV, plug in an appropriately wired SCART cable or use RCA cables for video/audio with a compatible SCART breakout adapter, and select SCART-CV from the Tink 5x’s Input Source menu.

S-Video

S-Video is an iteration of composite video that features two parts of the composite signal (Y and C) across two separate wires. Using S-Video cables are typically regarded as a visual improvement over “standard” composite cables. Consoles that supported S-Video output include (but not limited to) PlayStation, Nintendo 64, Saturn and Dreamcast.

To use S-Video with the Tink 5x, plug the S-Video cable into the Tink 5x’s “Y/C” input, and your left and right audio into the “L” and “R” inputs respectively. Then, select S-Video from the Tink 5x’s Input Source menu.

YPbPr / Component

YPbPr or "Component" video is a high quality analog standard that uses 3 RCA cables to carry separate parts of the video signal. Component video was featured on consoles such as PlayStation 2, PlayStation 3, Xbox, Wii, and Gamecube (model # DOL-001 only).

To use YPbPr with the Tink 5x, insert the Y RCA plug (typically colored green) into the Tink 5x’s “Y” input, insert the Pb RCA plug (typically colored blue) into the Tink 5x’s “Pb” input, and insert the "Pr" RCA plug (typically colored red) into the Tink 5x’s “Pr” input. For audio, insert your left and right audio into the “L” and “R” inputs respectively.

Then, select YPbPr or YPbPr (SDP) for from the Tink 5x’s Input Source menu.

Review the Input Source section of the guide for more information concerning differences between YPbPr and YPbPr (SDP) modes.

Recommended YPbPr / Component Cables

HD Retrovision

SCART-RGB

The Tink 5x supports RGB input through the SCART connector input. SCART was not widely used in the United States but was common in Europe, and video game consoles often featured RGB video and audio connections over SCART. To find out if your console supports RGB over SCART, check out the Systems Section from the RetroRGB merger, or the original RetroRGB webpage while the Wiki under construction.

Compatibility

Tink 5x is designed to accept RGB over SCART in the "EuroSCART" variant and NOT JP21. Though JP21 uses the same style connector, it is not compatible with the Tink 5x and may damage your hardware.

Sync

The Tink 5x accepts sync on luma, sync on composite and c-sync RGB over SCART configurations. Check with your SCART cable manufacturer to ensure compatibility with the RetroTink 5x Pro.

Note that TTL sync is not supported by the Tink 5x and may damage your hardware.

31khz Signals

The Tink 5x can accept 31khz RGB signals with the use of a compatible sync combiner device. This allows for "VGA" input from compatible sources / resolutions. Sync combiner products include the HD15-2-SCART and VGA2SCART. A common implementation of this option is accepting Dreamcast "VGA" using a compatible VGA cable. Other options include building a sync combiner directly into the SCART cable, such as the Retro Access Dreamcast 15khz/31khz SCART cable.

Recommended SCART-RGB Cables

Retro Access Cables

Retro Gaming Cables

Insurrection Industries

Cable Comparisons

Console Composite S-Video RGB Component
Nintendo 64 Examples #1
(Examples captured with NTSC N64 with Voultar's N64 RGB Kit installed)
N64 Generic Composite Example 1
N64 Insurrection Industries S-Video Cable Example 1
N64 Insurrection Industries RGB Cable Example 1
N64 HD Retrovision Component Cable Example 1
Nintendo 64 Examples #2
(Examples captured with NTSC N64 with Voultar's N64 RGB Kit installed)
N64 Generic Composite Example 2
N64 Insurrection Industries S-Video Cable Example 2
N64 Insurrection Industries RGB Cable Example 2
N64 HD Retrovision Component Cable Example 2
PlayStation 2 Example 1
Official Sony Composite Cable
Official Sony S-Video Cable
HD Retrovision PS2/3 Component Cable

Advanced Features

Triple Buffer vs Frame Lock Mode

Older video game consoles didn't always have perfect video timings. CRT's typically had no problems working with these variances, but these "imprecise" consoles can sometimes have trouble working with modern TV's and capture devices that conform to a more rigid standard. Some games, such as Silent Hill or Chrono Cross on the PlayStation 1, will alternate between 240p or 480i resolutions depending if you are in-game or in the items/pause menu respectively. This can often create a long delay and black screen while the device reorients to the new resolution. The issue of a device taking a gameplay-harming amount of time to change between resolutions has been colloquially called the "Chrono Cross" problem.

Triple Buffer
The RetroTINK-5X Pro uses Triple Buffer mode to effectively eliminate the "Chrono Cross" problem and create very high compatibility with displays and capture devices even for consoles with "imprecise" video. However, Triple Buffer mode comes at the expense of increased lag and occasional and minor judder. The lag varies between approximately 0.25 to 1.25 frames in this mode.

Frame Lock
For those looking for the lowest possible lag, the RetroTINK-5X Pro offers a Frame Lock mode. With Frame Lock enabled, the RetroTINK-5X Pro uses the console's video input as it's base clock and offers a fixed lag of approx. 0.25 frames. The lowered lag comes at the cost of possibly lower compatibility with some TVs and capture cards, and not protecting devices from the "Chrono Cross" problem.

The RetroTINK-5X Pro defaults to Triple Buffer mode to ensure the highest compatibility for users. To toggle between Triple Buffer and Frame Lock, navigate to the HDMI settings and toggle the V. Sync (Vertical Sync) option.

Horizontal Sampling Modes

The RT5X uses a combination of its flexible video ADC plus polyphase scaler to produce various horizontal sampling options. The Generic 4:3 and 16:9 modes interpolate the horizontal directions to produce the correct aspect ratio at the select output resolution.

The optimal modes, listed for the various consoles, sample the horizontal direction at the same rate as the original console. Here are the currently included "Optimal Timing" presets:

Preset Description
Generic 4:3 Scales the video using a 4:3 aspect ratio. Good generic choice for 4:3.
Generic 16:9 Scales the video using a 16:9 aspect ratio. Good generic choice for native 16:9 games or for stretching anamorphic 16:9 content to fill the screen.
SNES/PCE 256 For SNES or PC Engine / Turbo Graphix 16 games that use a 256 horizontal resolution.
Gen/Sat 320 For Genesis / Megadrive games that use a 320 horizontal resolution.
PS1 320 For PlayStation 1 games that use a 320 horizontal resolution.
N64 320 For Nintendo 64 games that use a 320 horizontal resolution.
NEOGEO 320 For NeoGeo games that use a 320 horizontal resolution.
Saturn 352 For Sega Saturn games that use a 352 horizontal resolution.
PS1 384 For PlayStation 1 games that use a 384 horizontal resolution.
HiRes 512 An optimal sampling mode for games that use a 512 horizontal resolution, including (but not limited to) specific PlayStation 1 and SNES games.
HiRes 858 HiRes 858 is a sampling mode that is optimized for later-generation 480i and 480p analog sources, including (but not limited to) DVD playback, Dreamcast, Xbox, GameCube, Wii, Xbox 360, PS2, PS3 and Wii U.
GBI Optimal An optimal sampling mode for use with Gamecube's running Extrem's Game Boy Interface software. GBI Optimal is only available when a 360p input is detected
DTV-A \ DTV-B Optimal sampling mode for 480p sources. DTV-A and DTV-B are closely related, choose A or B depending on what looks best to your eyes. DTV-A \ DTV-B is only available when a 480p input is detected .
DTV 858 (3:2) A 3:2 aspect ratio variant of the DTV 858 optimal mode. Consoles that use a 3:2 aspect ratio and 480p include the Sega Dreamcast. DTV 858 (3:2) is only available when a 480p input is detected and the output resolution is set to 2560x1440p.
DTV 858 (4x) An integer 4x scaled DTV sampling mode. DTV 858 (4x) is only available when a 480p input is detected and the output resolution is set to 2560x1440p.

Post Processing Filters

The RetroTINK-5X Pro features customizable post processing filters designed to simulate the look of certain CRT and LCD displays. Below is a list of the current featured presets, as well as examples captured from the same video source for comparison and reference. To view the post-processing effects example images with the best clarity, click once to view the images enlarged, and click the enlarged image again to view them in your browser without scaling.

Preset Off Slot Mask A. Grille -1 BVM
Description
Off (No Filter)
Slot Mask Preset
A. Grille-1 Preset
BVM Preset
Preset PVM-600 FV310 Consumer-1 Consumer-2
Description
PVM-600 Preset
FV-310 Preset
Consumer-1 Preset
Consumer-2 Preset
Preset LCD
(Optimal Horizontal Sampling)
LCD
(Generic Horizontal Sampling)
Description
LCD Preset - The LCD filter while using an optimal Horizontal Sampling preset. Creates a black border around individual pixels to simulate the look of a retro LCD screen, reminiscent of a Gameboy or Game Gear display.
LCD Preset using a generic Horizontal Sampling preset. Creates ultra-thin horizontal scanlines.

Pre-Scaling and Bob Scanline Modes

Pre-Scaling

The RetroTINK-5X Pro includes the ability to "Pre-Scale" content, or discard scanline intervals, at one-half or one-third increments of the source input. This discards vertical lines resulting in a loss of resolution and visual information, and isn't always a desirable effect. However, this loss in resolution is useful in some circumstances, such as more accurate scanline rendering for 240p visual content output from consoles that run at higher resolutions (such as the Dreamcast or Wii). The following example is from Street Fighter 3: Third Strike for the Dreamcast. The Dreamcast is outputting 480p, but the assets of the game are 240p graphics being doubled in software. The RetroTINK-5X Pro can throw away half the redundant visual data before applying post-processing effects, resulting in a more "arcade CRT authentic" scanline size and effect.

More information can be found at the Post-Processing Filters, Post-Processing, and Interpolation/Deinterlacing sections.

No Scanline Effects Scanline Post-Processing with No Pre-Scale Scanline Post-Processing with 1/2 Pre-Scale
No-prescale-example-no-scanlines-chun-li.png No-prescale-example-scanlines-chun-li.png One-half-prescale-example-scanlines-chun-li.png
This example was achieved by setting the Scanline to Gaussian and Scanline Str. to 50 in the Post-Processing section, and setting Prescale to 1/2 in the Interpolation/Deinterlacing section.

Bob Scanline Modes

Much like pre-scaling for progressive content, Bob Scanline Modes gives you additional control for how scanlines are applied with 480i interlaced content. To use the various Bob Scanline options, the Deinterlacer must be set to "Bob" or "Smooth Bob" in the Interpolation / Deinterlacing menu, and scanlines should be enabled in the Post-Processing menu (any preferred combination of "+Scanline Beam" and "+Scanline Str." settings).

The "Post-Deint." or Post Deinterlace option applies scanlines after the 480i source has been deinterlaced to 480p. This gives the appearance of thinner scanlines.

"Pre-Deint. or "Pre-Deinterlace" treats the 480i source as 240p, so the applied scanlines are thicker. This is especially appropriate for situations where a 240p graphical asset game is being displayed in a 480i video mode.

The "CRT Simulate" setting functions similarly to Pre-Deinterlace, but shifts the odd and even scanlines every frame to reproduce how a CRT display would draw the image. For more context on how deinterlacing works, please see a section that has not been written yet serving as a quick primer on interlacing and deinterlacing.

Below are some examples from Mega Man Anniversary Collection on the PlayStation 2. It is an example of a game that renders 240p assets through 480i video output. This is not typically a desirable combination for the best video quality, but using Bob Scanline modes and scanline Post Processing filters can help improve the visual experience of the game.

Motion Adaptive (default) Bob + Pre-Deint. Bob + Post-Deint.
Bob + CRT Simulate Bob + Pre-Deint. + Scanlines Bob + CRT Sim. + Scanlines

Saving and Loading Profiles

The RetroTINK-5X Pro includes 10 slots to save your custom settings. To save your settings, navigate to the [Save Profile] section from the Main Menu. Selecting one of the Save Profile slots (1-10) will save any current changes made to the RetroTINK-5X Pro system into the chosen slot. The values can then be loaded from the Load Profile menu, or a slot be set to load on boot from the On-Screen Display/Startup Profile selection.

Console Specific Configurations

Wobbling Pixel's Recommended Settings

Link to Wobbling Pixel's YouTube Channel

PlayStation 1

Game Boy Interface (Gamecube + Gameboy Advance Player)

PSP

N64

Dreamcast

SNES

PlayStation 2

SNES 8:7 Aspect Ratio Mode

Go to 1440p and decrease the sample rate to 2046 While in the genesis 320 profile.

Upgrading Firmware

To access the latest bugfixes and upgrades with the RetroTINK-5X Pro, it is necessary to upgrade the device's firmware. Upgraded firmware files can be found from the official RetroTINK website, or by joining the Discord community to gain access to the latest experimental firmware versions.

Bob from RetroRGB has created a video tutorial giving step-by-step details on how to perform a firmware upgrade on the RetroTINK line of products.

RetroTINK-5X Pro Firmware Notes

The current public firmware version is 2.71. For older firmware version notes, please see the RetroTINK-5X Pro firmware version history wiki page.

Version 2.71

Originally released April 19th, 2022

Notice: Firmware updates erase saved profiles and reset the device to default settings.

  • Advanced resolutions: 1440p, 4K24, 1536p are hidden by default. Go to [OSD] -> Advanced Res option to enable them.
  • New experimental high resolution modes added:
  • 2560 x 1440 wide screen 1440p for broader compatibility with TVs that will not accept 1920 x 1440.
  • 2048 x 1536 ("iPad").
  • 4K24 (for 60 Hz sources) and 4K25 (for 50 Hz) sources. Frame lock on for 60 Hz sources changes to 4K30.
  • These modes are considered experimental and provided without support or guarantees.
  • New 1080p (Min-Lag) mode operates the RT5X as a line doubler to achieve ~1 ms when frame lock is turned on for 240p, 480i and 480p sources.
  • 720p source can be scaled to 1920 x 1440 or 2560 x 1440.
  • 240p and 540p modes have been removed to save space.
  • "Pre-scaler" option in the [Interp./Deint.] menu to convert 480p and 720p sources to 240p, before re-upscaling.
  • Optimal timings re-enabled for composite and S-video sources.
  • Option to enable optimal timings for interlaced sources.
  • Hi-Res 512 and 858 optimal timing modes added.
  • "Pre-emph" filter now goes down to -5.
  • Option to load profile on power up in the [OSD] -> Startup Profile option.
  • Press and hold remote control button to keep incrementing/decrementing option.
  • Press "back" button 6 times rapidly to load default profile.
  • Variety of bug and crop fixes.

RetroTINK-5X Pro User Interface Map

RetroTINK-5X Pro Main Menu

RetroTINK-5X Pro Main Menu Description
[Input] Opens the Input Source Menu.
[Output Res.] Opens the Output Resolution Menu.
[Scaling/Crop] Opens the Scaling/Cropping Menu.
[Interp./Deint.] Opens the Interpolation/De-interlacing Menu.
[H. Sampling] Opens the Horizontal Sampling Menu.
[Post. Proc.] Opens the Post-Processing Menu.
[SDTV Decoder] Opens the Standard Definition Decoder Menu.
[Video ADC] Opens the Video ADC Menu.
[HDMI] Opens the HDMI Output Menu.
[OSD] Opens the On-Screen Display Menu.
[Save Profile] Opens the Save Profile Menu.
[Load Profile] Opens the Load Profile Menu.
[Status] Opens the Status Menu.
[About] Opens the About Menu.

Input Source

Input Source Description
YPbPr Selects YPbPr input for “component” input. Supports 240p-1080i video sources.
SCART-RGB Selects SCART-RGB input. Supports 240p/480i RGB inputs, as well as “VGA”/”858” inputs using supported sync-combining cables and hardware (see HD15-2-SCART for more info).
Composite Selects composite input. Supports standard definition 240p / 480i video sources.
S-Video Selects S-Video input. Supports standard definition 240p / 480i video sources.
SCART-CV Selects composite video via the SCART connector. Composite over SCART cable or compatible RCA to SCART adapter is required. Supports standard definition 240p / 480i video sources.
YPbPr (SDP) Selects YPbPr input using the standard definition processor (SDP). Not as sharp as the normal YPbPr input but supports better error tolerance and color adjustments. Only accepts standard definition 240p or 480i sources.

Output Resolution

Output Resolution Description
1080p (Fill) Selects 1080p (Fill) output mode. In this mode, the video source will be stretched vertically to fit the screen. Pro’s: None of the video information is cropped, all of the vertical screen space is used. Con’s: Somewhat softer image due to the non-integer scaling.
1080p (Over) Selects 1080p (Over) output mode. In this mode, a 240p signal will be multiplied 5 times and 480i / 480p are multiplied 2.5 (2.5x) times. The output will slightly exceed the vertical edges of the 1080p frame and be cropped at the top and bottom. Many retro games accommodate this cropping as they were intended to be played on CRT’s that typically cropped this area as well. Pro’s: Larger playfied due to the 5x scale and sharp image thanks to integer scaling. Con’s: Vertically cropped image.
1080p (Under) Selects 1080p (Under) output mode. In this mode, a 240p signal will be multiplied 4 times and 480i / 480p are multiplied 2 times. The video output will be centered on the screen with a black border. Pro’s: Sharp integer scaled output. Con’s: Smaller image / unused 1080p screen space.
1080p (Min-Lag) Selects 1080p (Min-Lag) output mode. In this mode, 240p, 480i and 480p sources are scaled in approximately 1 millisecond to achieve the absolute lowest possible latency.
1200p Selects 1200p output mode.
720p Selects 720p output mode.
480p Selects 480p output mode.

Output Resolution (Advanced Res)

The following outputs are disabled by default and can be enabled by setting “Advanced Res” to “On” in the [OSD] (On-Screen Display) menu.

Output Resolution (Advanced Res) Description
1920x1440p Selects 1920x1440p output mode.
2560x1440p Selects 2560x1440p output mode.
4K (24/25Hz) Selects 4K (24/25Hz) output mode.
1536p (iPad) Selects 1536p (iPad) output mode.

Scaling/Cropping

Scaling/Cropping Description
H Position Adjusts the horizontal position of the video output.
V Position Adjusts the vertical position of the video output.
H (Interp) Size Adjusts the horizontal size of the video output. When in a generic h. sampling mode, the adjustment will be represented in a percentage value. In an optimal sampling mode, the adjustment is a pixel incremental value.
V Size Adjusts the vertical size of the video output, adjustment represented in a percentage value.
H Crop Start Sets the cropping position for the left side of the screen. Masked off areas will be shown in pink.
H Crop End Sets the cropping position for the right side of the screen. Masked off areas will be shown in pink.
V Crop Start Sets the cropping position for the top of the screen. Masked off areas will be shown in pink.
V Crop End Sets the cropping position for the bottom of the screen. Masked off areas will be shown in pink.

Interpolation/De-interlacing

Interpolation/De-interlacing Description
Vertical Filter
Sharp: Uses a sharp interpolation method to generate the sharpest possible pixel edges.
Medium: A somewhat softer option for less hard edges from pixel to pixel, akin to a "bilinear filtering" mode.
Soft: Set to choose soft edges around the pixels, akin to a "bilinear filtering" mode.
Smooth: A custom smoothing algorithm akin to a classic emulator "Super Eagle" mode.
Deinterlace Method Motion Adaptive Weave Blend Bob Smooth-Bob
Example From Sonic The Hedgehog 2
for Genesis/Megadrive 2-Player Mode
(480i interlaced video).
Interpolation/De-interlacing Description
Bob Offset -4 to +4
Bob Scanline Post-Deint.: "Post-Deinterlace" Applies scanlines to the image as 480p. The 480i is deinterlaced to 480p and the scanlines are applied.
Pre-Deint.: "Pre-Deinterlace" treats the 480i source as 240p so the applied scanlines are thicker.
CRT Simulate: "CRT Simulate" is the same as Pre-Deinterlace, but shifts the odd and even scanlines every frame to reproduce how a CRT display would draw the image.
Field Order Normal, Invert
Pre-scaler Off: No line skipping.
1/2: Skips every other vertical line, e.g. 480p becomes 240p.
1/3: Skips 2 out of 3 lines, e.g. 720p becomes 240p.

See the Pre-Scaling section above for more info.

Horizontal Sampling

Note for further explanation - The H. Interp takes the horizontal resolution produced by the ADC sample rate and the further interpolates it to the final display resolution.

Horizontal Sampling Description
Preset See the Horizontal Sampling Modes section above.
Phase Detect N/A (In Generic 16:9 and Generic 4:3 Presets), Auto, 1 of 5, 2 of 5, 3 of 5, 4 of 5, 5 of 5.
Lock Speed Slow, Medium, Fast
ADC Samp./Line
H (Interp) Size Adjusts the horizontal size of the video output. When in a generic h. sampling mode, the adjustment will be represented in a percentage value. In an optimal sampling mode, the adjustment is a pixel incremental value.
Allow Interlace Disabled (default), Enabled.

Post-Processing

Post-Processing Description
Load Preset See Post Processing Filters section above.
+Scanline Beam Off, Exponential, Gaussian, S. Gaussian, LCD.
+Scanline Str. 0-50.
+Intensity Mod. 0-50.
+Mask Slot, Grille-Med., Grille-Bright, Grille-Coarse, Shadow-1, Shadow-2, Shadow-3, Off.
+Gamma Boost -10 to +10.
+Color Boost -10 to +10.
+Pre-emph -5 to +3. Negative values apply a blurring effect, positive values apply a sharpening effect.

Standard Definition Decoder

Standard Definition Decoder Description
Brightness -128 to +127. 0 is Default.
Chroma -128 to +127. 0 is Default.
Phase -128 to +127. 0 is Default.
Contrast -128 to +127. 0 is Default.
Y/C Filter 4L Adaptive (default), 4L Fixed, Notch.
Aperture 0 to 15, 1 is default.
CTIE 0 to 3, 1 is default.
Black Level 0 IRE (default), 7.5 IRE.

Video ADC

Video ADC Description
SDTV LPF Off, Light, Medium (default), Strong.
EDTV LPF Off (default), On.
SoG Thresh 20mV - 300mV. 120mV is Default.
LLPLL Gain 0 to 7. 2 is Default.
LLPLL BW 0 to 7. 7 is Default.
Pre-Coast 0 to 32. 1 is Default.
Post-Coast 0 to 32. 6 is Default.
ADC Phase 0.00 Deg, 11.25 Deg, 22.50 Deg, 33.75 Deg, 45.00 Deg, 56.25 Deg, 67.50 Deg, 78.75 Deg. 90.00 Deg, 101.25 Deg, 112.50 Deg, 123.75 Deg, 135.00 Deg, 146.25 Deg, 157.50 Deg, 168.75 Deg, 180.00 Deg, 191.25 Deg, 202.50 Deg, 213.75 Deg, 225.00 Deg, 236.25 Deg, 247.50 Deg, 258.75 Deg, 270.00 Deg, 281.25 Deg, 292.50 Deg, 303.75 Deg, 315.00 Deg, 326.25 Deg, 337.50 Deg, 348.75 Deg. 180.00 Deg. is Default.

HDMI Output

HDMI Output Description
V-Sync Triple Buffer, Frame Lock. See Triple Buffer vs Frame Lock Mode for more information.
Lock to 60 Hz Off (default), On.
Colorspace RGB Full (default), RGB Limited.
Chroma Mode Auto (default), FIRST/POINT, FIRST/LINEAR, ZERO/POINT, ZERO/LINEAR.
Blue Only Off (default), On.
Disable CSC Off (default), On.
AVINFO AR 16:9 (default), 4:3.
TMDS Clock: Fix it note- Mine shows 148.50 MHz, not sure what changes this value.

On-Screen Display

On-Screen Display Description
Size Small (default), Tiny, Normal.
Blanking Color Blue (default), Green, Red, Gray, Black.
Lightgun Border Off (default), On.
Startup Profile Default (default), 1 to 10.
Advanced Res No (default), Yes.

Save Profile

Save Profile Description
Slot 1 - Slot 10 Selecting one of the Save Profile slots (1-10) will save any current changes made to the RetroTINK-5X Pro system into the chosen slot. The values can be loaded from the Load Profile menu, or be set to load on boot from the On-Screen Display/Startup Profile selection.

Load Profile

Load Profile Description
Slot 1 - Slot 10 Any profile previously saved from the Save Profile menu can be loaded here. Profiles can also be set to load on boot from the On-Screen Display/Startup Profile selection.
Default Selecting default will restore the RetroTINK-5X Pro to the initial default settings.

Status

Status Description
Source: Shows the currently selected input source.
Output Res: Shows the currently selected output resolution.
No Signal The information in the rows below will only be displayed if a source is detected. Else, "No Signal" will be displayed.
Input Lines: Displays the current input's horizontal resolution.
Input H-Freq: Displays the current input's horizontal timing frequency.
Input V-Freq: Displays the current input's vertical timing frequency.
Samples/Line: Displays how many samples per scanline the RetroTINK-5X Pro is processing.
ADC Clock:
Ticks/Frame:

About:

The about page will display the following information as of the current firmware update:

RETROTINK-5X Pro
© 2021-2-22 RetroTINK LLC
All Rights Reserved
(QR CODE)
Need Help? Scan the QR Code to
Join the RetroTINK Discord

Official User's Manual v1

A Wiki version of the official RetroTINK-5X Pro user's manual can be found here.