Xbox 360:XFlasher 360: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
Element18592 (talk | contribs) No edit summary |
||
| Line 8: | Line 8: | ||
There are two possible positions for the switch on the xFlasher: | There are two possible positions for the switch on the xFlasher: | ||
* `SPI`: For 16/256/512MB NANDs and programming glitch chips. | |||
* `eMMC`: For reading and flashing 4GB NANDs. | * `eMMC`: For reading and flashing 4GB NANDs. | ||
==Updating Glitch Chip Timing File== | ==Updating Glitch Chip Timing File== | ||
| Line 15: | Line 15: | ||
# Set the switch to SPI if not set to that already. | # Set the switch to SPI if not set to that already. | ||
# Plug in the xFlasher to your computer via the mini USB cable and plug in the glitch chip using the glitch chip programming cables. | # Plug in the xFlasher to your computer via the mini USB cable and plug in the glitch chip using the glitch chip programming cables. | ||
# Launch J-Runner, select Advanced > `Custom NAND/Timing File Functions`, then choose your | # Launch J-Runner, select Advanced > `Custom NAND/Timing File Functions`, then choose your SVF file, and start. | ||
==Troubleshooting== | ==Troubleshooting== | ||
* Verify all solder points are well done and not bridged. If unsure or think it is badly done, reflow the solder. | * Verify all solder points are well done and not bridged. If unsure or think it is badly done, reflow the solder. | ||
* Try running J-Runner as Administrator (Right click J-Runner > Run as Administrator). | * Try running J-Runner as Administrator (Right click J-Runner > Run as Administrator). | ||
Revision as of 06:58, 26 July 2021
The xFlasher 360 is a device created by Element18592 (TheModShop.co) used to read/write to Xbox 360 NANDs and program glitch chips. It works in conjunction with the Windows program J-Runner with Extras and can be used for JTAG and RGH installs. It is the fastest NAND programmer and achieves speeds up to 3x faster than the NAND-X.
Drivers can be downloaded here or in J-Runner with Extras by plugging in your xFlasher and clicking the xFlasher menu and “Install Drivers”. The official user guide can be found on TheModShop.co.
A setup video can be found on Octal450’s YouTube channel.
Switch Usage
There are two possible positions for the switch on the xFlasher:
SPI: For 16/256/512MB NANDs and programming glitch chips.eMMC: For reading and flashing 4GB NANDs.
Updating Glitch Chip Timing File
- Plug in console power but do not turn it on.
- Set the switch to SPI if not set to that already.
- Plug in the xFlasher to your computer via the mini USB cable and plug in the glitch chip using the glitch chip programming cables.
- Launch J-Runner, select Advanced >
Custom NAND/Timing File Functions, then choose your SVF file, and start.
Troubleshooting
- Verify all solder points are well done and not bridged. If unsure or think it is badly done, reflow the solder.
- Try running J-Runner as Administrator (Right click J-Runner > Run as Administrator).