PS1:Video Cables

RF modulator

"or" means switchable, except on the SCPH-10072 which only supports a single standard depending on the specific unit.

Early production

For consoles with RCA ports only. Apparently based on the Sony RFU-90* modulator for Handycams.

• SCPH-1060 (NTSC-M, Japanese VHF channels 1 or 2)
• SCPH-1061 (NTSC-M, American VHF channels 3 or 4)
• SCPH-1062 (PAL-G or PAL-I, European UHF channel 36)

Late production

For any console, including PS2/PS3 (uses AV Multi Out).

• SCPH-1120 (NTSC-M, Japanese VHF channels 1 or 2)
• SCPH-1121 (NTSC-M, American VHF channels 3 or 4)
• SCPH-1122 (PAL-G or PAL-I, European UHF channel 36)

Later production

Designed for PS2, works on any console with AV Multi Out. Long composite/power cable and short RF cable, the opposite of its predecessors.

• SCPH-10070 (NTSC-M, Japanese VHF channels 1 or 2)
• SCPH-10071 (NTSC-M, American VHF channels 3 or 4)
• SCPH-10072 (PAL-G or PAL-I, European UHF channel 36)

Composite

For any console, including PS2/PS3 (uses AV Multi Out).

• SCPH-1140 (early production: hexagonal plugs, late production: round plugs with 4 alternating dashed/dotted grips)
• SCPH-10030 (as above, with PS2 branding)
• SCPH-10500 (PS3 branding, metalized plugs)
• SCPH-1160 (RCA splitter with AV Multi Out passthrough)
• SCPH-10080 (as above, with PS2 branding)
• SCPH-10120 (as above, plus S-Video)

S-Video

For any console, including PS2/PS3 (uses AV Multi Out).

• SCPH-1100 (direct cable)
• SCPH-10060 (as above, PS2 branding)
• SCPH-10500 (as above, PS3 branding, metalized plugs)
• SCPH-10120 (breakout box)

RGB

For PS1 only (reduced performance on PS2/PS3 since terminating capacitors, present in these cables, got integrated in the console: only SCART replacement released as SCPH-10142). Backwards compatible with composite.

• SCPH-1050 (JP-21)
• SCPH-1052 (SCART)
• RGB SCART cables with port for light guns (RetroGamingCables.co.uk)
• Retro-Access RGB SCART cables with port for lightguns (Retro-Access)

Component YPbPr

While the PS1 does not output component YPbPr, there are cables that adapt the RGB signals to YPbPr.

• HD Retrovision Cable + PS1 adapter

HDMI

While the PS1 does not output HDMI, the RAD2X cables will adapt the signal to HDMI and also upscale the image.

• RAD2X Cables

AV Multi In (Game)

Cable with PlayStation connector on both sides, for use with compatible Sony TVs (Japan only?) including the official PS1 TV - the CRT:KV-21SP1.

For any console, including PS2/PS3 (uses AV Multi Out), whose YPbPr mode is also supported.

• VMC-AVM250