Example Page/pt

From ConsoleMods Wiki
Revision as of 02:37, 21 September 2024 by Rodrigo (talk | contribs) (Created page with "v14")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Other languages:

Este é um teste

v2

v3

v4

v5

v6

v7

v8

v9

v10

v11

v12

v13

v14

This method is much easier but removes RF output.

  1. Mount mod board at this location (picture).
  2. Connect wires from here to here.
  3. Set these other jumpers.
  4. Test the solution by checking XYZ.

Finishing Up

  1. Clean up with isopropyl alcohol and test it.
  2. If testing fails then check X, Y, and Z.
  3. Reassemble the unit.

Usage

  • Give usage instructions if necessary.
  • Cover any additional options post-install, such as configuration jumpers or software settings.

Troubleshooting and Tips

  • List specific tips here or common issues people run into.
Retrieved from "https://consolemods.org/wiki/index.php?title=Example_Page/pt&oldid=48040"