TG16:Killer Standoff (SuperGrafx)

From ConsoleMods Wiki
Revision as of 20:19, 16 July 2022 by Derf (talk | contribs) (Created page with "The SuperGrafx has a design flaw that causes extra pressure to be put on the PCB which eventually can cause up to 72 traces to be severed. 400px 450px == Fixing the Issue == # Disassemble the console and locate the problematic stand-off: <br> 300px # Use any cutting tool to trim some the stand-off down. It is debated on whether the PCB sho...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The SuperGrafx has a design flaw that causes extra pressure to be put on the PCB which eventually can cause up to 72 traces to be severed.

SuperGrafx Killer Standoff 1.jpg SuperGrafx Killer Standoff 2.jpg

Fixing the Issue

  1. Disassemble the console and locate the problematic stand-off:
    SuperGrafx Killer Standoff Before.jpg
  2. Use any cutting tool to trim some the stand-off down. It is debated on whether the PCB should still make contact with the stand-off for support, or to just cut it low enough for the PCB to not make contact.
    SuperGrafx Killer Standoff After.jpg
Retrieved from "https://consolemods.org/wiki/index.php?title=TG16:Killer_Standoff_(SuperGrafx)&oldid=14306"