PS2:Video Cables

From ConsoleMods Wiki
Revision as of 06:37, 3 June 2024 by Nadaman (talk | contribs) (Add the RAD2X and PACKAPUNCH cables directly on this page, while categorizing the Retrovision cable)
Jump to navigation Jump to search

RF, Composite, S-Video

Same as PlayStation 1.

RGB

Except on the Japanese-launch-exclusive DVD Player 1.0 and third party hacks, RGB mode is artificially incompatible with DVD-Video playing software.

Standard resolution

Sync from video (composite/Y) only.

ED and HD

  • SCPH-10320 (VGA HD-15)
    • Sync on green only.
  • VMC-AVM250 (AV Multi In)
  • PACKAPUNCH Cable
  • PACKAPUNCH Cable (With Guncon port)
  • As there is no difference between RGB and YPbPr cables except the attached connectors, they are interchangeable if atypical connectors are desired.

YPbPr

  • SCPH-10100 (RCA)
  • SCPH-10490 (as above, PS3 branding)
  • SCPH-10330 (D-Terminal)
  • SCPH-10510 (as above, PS3 branding)
  • VMC-AVM250 (AV Multi In)
  • HD Retrovision component (YPbPr) cable
  • PACKAPUNCH Cable

HDMI

While the PS2 does not output HDMI, the RAD2X cables can adapt an RGB signal to HDMI and upscale the image to 480p.

  • RAD2X Cable
    • This does not allow you to convert a YPbPr signal to HDMI. This means that the native 480p output through a PS2 will not be compatible, but the upscaling produced by this adapter should produce a similar result.
Retrieved from "https://consolemods.org/wiki/index.php?title=PS2:Video_Cables&oldid=42938"