PS1:Video Cables

From ConsoleMods Wiki
Revision as of 13:18, 14 July 2023 by Derf (talk | contribs)
Jump to navigation Jump to search

RF modulator

Early production

For consoles with RCA ports only. Apparently based on the Sony RFU-90* modulator for Handycams.

  • SCPH-1060 (NTSC-M, Japanese VHF channels 1 or 2)
  • SCPH-1061 (NTSC-M, American VHF channels 3 or 4)
  • SCPH-1062 (PAL-G or PAL-I, European UHF channel 36)

Late production

For any console, including PS2/PS3 (uses AV Multi Out).

  • SCPH-1120 (NTSC-M, Japanese VHF channels 1 or 2)
  • SCPH-1121 (NTSC-M, American VHF channels 3 or 4)
  • SCPH-1122 (PAL-G or PAL-I, European UHF channel 36)

Later production

Designed for PS2, works on any console with AV Multi Out. Long composite/power cable and short RF cable, the opposite of its predecessors.

  • SCPH-10070 (NTSC-M, Japanese VHF channels 1 or 2)
  • SCPH-10071 (NTSC-M, American VHF channels 3 or 4)
  • SCPH-10072 (PAL-G or PAL-I, European UHF channel 36)

Composite

For any console, including PS2/PS3 (uses AV Multi Out).

  • SCPH-1140 (early production: hexagonal plugs, late production: round plugs with 4 alternating dashed/dotted grips)
  • SCPH-10030 (as above, with PS2 branding)
  • SCPH-10500 (PS3 branding, metalized plugs)
  • SCPH-1160 (RCA splitter with AV Multi Out passthrough)
  • SCPH-10080 (as above, with PS2 branding)
  • SCPH-10120 (as above, plus S-Video)

S-Video

For any console, including PS2/PS3 (uses AV Multi Out).

  • SCPH-1100 (direct cable)
  • SCPH-10060 (as above, PS2 branding)
  • SCPH-10500 (as above, PS3 branding, metalized plugs)
  • SCPH-10120 (breakout box)

RGB

For PS1 only (reduced performance on PS2/PS3 since terminating capacitors, present in these cables, got integrated in the console: only SCART replacement released as SCPH-10142). Backwards compatible with composite.

Component YPbPr

While the PS1 does not output component YPbPr, there are cables that adapt the RGB signals to YPbPr.

HDMI

While the PS1 does not output HDMI, the RAD2X cables will adapt the signal to HDMI and also upscale the image.

AV Multi In (Game)

Cable with PlayStation connector on both sides, for use with compatible Sony TVs (Japan only?) including the official PS1 TV - the CRT:KV-21SP1.

For any console, including PS2/PS3 (uses AV Multi Out), whose YPbPr mode is also supported.

  • VMC-AVM250
Retrieved from "https://consolemods.org/wiki/index.php?title=PS1:Video_Cables&oldid=24727"