PS3:Buying Guide

From ConsoleMods Wiki
Revision as of 22:03, 8 January 2022 by Derf (talk | contribs)
Jump to navigation Jump to search

This page serves as a reference for the pros and cons of each model of PS3. This is all objectively based recommendations, with no bias for the appearance of the console. Acronym definitions can be found on the FAQ page.

First Generation Fat Consoles

Exclamation-triangle-fill.svgAll first generation fat consoles have a very high YLOD risk: Proceed with caution if you commit to buying one.


Model Description CPU/RSX Sizes Default HDD Size Motherboard MinVerChk
CECHA First PS3 console released. Features full hardware PS2 backwards compatibility (EE+GS) alongside four USB ports, two 128MB NAND flash chips, multiple card-reader ports, and the ability to play SA-CDs. Released in the U.S and East Asia. 90nm RSX & 90nm CELL BE 60GB COK-001 1.00
CECHB Lower-end "budget" CECHA. Came with a 20GB HDD, no card readers, and no WiFi capabilities. Also only released in the U.S and East Asia. 90nm RSX & 90nm CELL BE 20GB COK-001 1.00
CECHC First console to see one of its PS2 hardware backwards chips (EmotionEngine chip) removed and instead have an emulated placeholder PS2 CPU. First PS3 to be released worldwide, except the U.S and East Asia. 90nm RSX & 90nm CELL BE 60GB COK-002 1.00 / 2.30
CECHE Refresh of the CECHC, but with an upgraded HDD. In some cases, the CECHE might have a COK-002W motherboard, indicating that it has been refurbished. Released in the U.S and some parts of Asia. 90nm RSX & 90nm CELL BE 80GB COK-002 or COK-002W 1.00 / 2.70 / 3.40
  • A good way to distinguish first generation fats is by looking at the front of the console and seeing if the silver lining above the disc drive has reflection/is chrome. If it does, it is a guaranteed first generation fat.

Second Generation Fat Consoles

Model Description CPU/RSX Sizes Default HDD Size Motherboard MinVerChk
CECHG First console to have the PS2 backwards compatibility chips completely removed, as well as two USB ports, the card reader ports, and the ability to play SA-CDs. Due to poor heatsink design and removal of the front intake vents, this model is very likely to suffer from YLOD unless modified for bigger intake vents. First PS3 to be released globally. Some CECHGs, if refurbished, can come with a DIA-002 motherboard. Avoid this console. 90nm RSX & 65nm CELL BE 40GB SEM-001 or DIA-002 1.90 / 1.97 / 2.30
CECHH First console to use a 16MB NOR flash instead of two 128MB NAND ones. 90nm or 65nm RSX & 65nm CELL BE 40GB DIA-001 1.97 / 2.30
CECHJ First console to feature a 65nm RSX. 65nm RSX & 65nm CELL BE 40GB DIA-002 2.30
CECHK Rebranded CECHJ. 65nm RSX & 65nm CELL BE 40GB DIA-002 2.16 / 2.30

Third Generation Fat Consoles

Model Description CPU/RSX Sizes Default HDD Size Motherboard MinVerChk
CECHL The original third generation fat console. Many CECHL NOR chips are known to have factory defects that cause RSOD. RSODs cannot be fixed unless you have CFW. Avoid this console. 65nm RSX & 65nm CELL BE 80GB VER-001 2.30 / 2.45
CECHM Similar to CECHL, but with fixed NOR chips. 65nm RSX & 65nm CELL BE 80GB VER-001 1.97 / 2.30
CECHP Similar to CECHM, but with a larger capacity hard drive. 65nm RSX & 65nm CELL BE 160GB VER-001 2.45
CECHQ Similar to CECHM, but with a larger capacity hard drive. 65nm RSX & 65nm CELL BE 160GB VER-001 2.70?

Slim Consoles

Model Description CPU/RSX Sizes Default HDD Size Motherboard MinVerChk
CECH-20XX Slim launch model. Introduces multiple variants of consoles, distinguished by "A" or "B" in the model number and different hard drive sizes. 65nm RSX & 45nm CELL BE 120GB(A) or 250GB(B) DYN-001 2.70
CECH-21XX Second model of slims released. 40nm RSX & 45nm CELL BE 120GB (A) or 250GB(B) SUR-001 3.20 / 3.40
CECH-25XX Third model of slims released. Last models to support the installment of CFW, read note below for more information. Blu-Ray daughterboard is embedded in motherboard, lessening the chance of disc drive issues and eliminating the possibility of needing No-BD firmware. 40nm RSX & 45nm CELL BE 160GB(A) or 320GB(B) JSD-001 or JTP-001 3.40 / 3.50 / 3.56 / 3.60
CECH-30XX Fourth model of slims released. Does not support installation of CFW. 40nm RSX & 45nm CELL BE 160GB(A) or 320GB(B) KTE-001 3.60 / 3.65 / 3.66 / 3.72 / 4.10
  • IMPORTANT NOTE FOR CECH-25XXs: Consoles produced circa January 2011 and later are known to have an updated hardware encryption key (metldr2) and a MinVerChk of 3.60, and therefore cannot use CFW. A quick way to check if the console is downgradable is by looking at the datecode for a 0 or a 9, or at the manufacture date to check that it was produced prior to 2011. Consoles that fall into these date ranges can be downgraded. For consoles after this date, you can check if it is downgradeable by running MinVerChk on the console to ensure it reports 3.56 or below.

Super Slim Consoles

Model Description CPU/RSX Sizes Default HDD/eMMC Size Motherboard MinVerChk
CECH-40XX First model Super Slim. 28nm RSX* & 45nm CELL BE 16GB eMMC(A) or 250GB(B) or 500GB(C) HDD MSX-001 or MPX-001 or NPX-001 4.10? / 4.20 / 4.22 / 4.25
CECH-42XX Second model Super Slim. 28nm RSX* & 45nm CELL BE 16GB eMMC(A) or 250GB(B) or 500GB(C) HDD MSX-001 or MPX-001 or NPX-001 or PQX-001 4.40 / 4.45?
CECH-43XX Third model Super Slim. The last PS3 to ever be released. 28nm RSX* & 45nm CELL BE 16GB eMMC(A) or 250GB(B) or 500GB(C) HDD RTX-001 or REX-001 4.45?
  • IMPORTANT NOTE TO SUPER SLIMS: This generation of console is not compatible with CFW and cannot be modified to run classic PS3 homebrew. The only exploit that can be run is HAN and HEN, which allows for game backups to be run as well as some basic homebrew.
  • *Note that you can also happen to get Super Slims with a 40nm RSX, if you happen to get one with a MPX-001 or a MSX-001 motherboard.

Tips

  • Always change the thermal paste when you buy a new console. This will ensure the longevity of the console and also make it quieter during use.
  • When you get a CFW compatible console, to always install CFW and install webMAN mod. webMAN allows you to modify the fan speed of the console which will also strongly contribute to increasing the maximum lifespan of it. A recommended setting is to set the fan speed to manual at 39%.