GameCube:3D Printed Fan Mod: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
No edit summary
m (Text replacement - "/mediawiki/" to "/wiki/")
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:RetroRGB Migration]]
[[Category:GameCube]]
[[File:IMG_20180923_202019-300x225.jpg) ![](images/MVIMG_20180923_201850-300x225.jpg]]


This is a mod designed by [https://twitter.com/collingall Greg Collins] that adds a custom 3D printed fan mount for the GameCube, which allows you to install a standard 50mm x 10mm PC fan. Current version of design files:  [http://www.retrorgb.com/assets/3dprint/GameCubeFanModV1.1.zip http://www.retrorgb.com/assets/3dprint/GameCubeFanModV1.1.zip] As an FYI, all of Greg's designs can be purchased from his web store here:  [https://laserbear.net/ https://laserbear.net/]
This is a mod designed by [https://twitter.com/collingall Greg Collins] that adds a custom 3D printed fan mount for the GameCube, which allows you to install a standard 50mm x 10mm PC fan. The mod was created with the intention to use a quieter fan than the original system fan, but it also provides a means to replace failing parts in a system that is almost twenty years old.


# Model files for this project are available for free, licensed under the Creative Commons �" Attribution license:  [http://creativecommons.org/licenses/by/3.0/ http://creativecommons.org/licenses/by/3.0/] (Modifications and reproduction of the design are allowed, but require credit to the designer.)
<small>'''Note:''' All of Greg's designs can be purchased from his web store here:  [https://laserbear.net/ https://laserbear.net/]</small>


Model files are functional, but may change if issues arise.
== Source Files ==
[https://consolemods.org/wiki/images/0/0e/GameCubeFanModV1.1.zip GameCubeFanMod V1.1.zip]


The mod was created with the intention to use a quieter fan than the original system fan, but it also provides a means to replace failing parts in a system that is almost twenty years old.
<small>Model files for this project are available for free, licensed under the Creative Commons Attribution license(Modifications and reproduction of the design are allowed, but require credit to the designer.</small>


It was requested by Newschool2k17 and inspired by his mod [https://assemblergames.com/threads/gamecube-silent-fan-mod.67463/ https://assemblergames.com/threads/gamecube-silent-fan-mod.67463/]
== Recommended Hardware ==


The suggested fan is a Noiseblocker XS-1, but any 50mm x 10mm 12vdc fan will be compatible.
==== Fan ====
*Noiseblocker XS-1 <small>'''(any 50mm x 10mm 12vdc fan will be compatible)'''</small> [https://www.laserbear.net/products/noiseblocker-xs-1-50mm-fan | LaserBear Industries]


The noise blocker fan can be found on Amazon or likely any pc parts re-seller.
<small>'''Note:''' The noise blocker fan can be found on Amazon or likely any pc parts re-seller.</small>
 
In addition to the fan it may be helpful to get a compatible connector to interface with the original port. These can be found at digikey with the following part numbers/links, if you want to cut the wire off of your old fan that will also work.


==== Connector ====
<small>It may be helpful to get a compatible connector to interface with the original port. These can be found at digikey with the following part numbers/links, if you want to cut the wire off of your old fan that will also work.</small>
* 455-1165-ND - [https://www.digikey.com/product-detail/en/PHR-2/455-1165-ND/608607 https://www.digikey.com/product-detail/en/PHR-2/455-1165-ND/608607]
* 455-1165-ND - [https://www.digikey.com/product-detail/en/PHR-2/455-1165-ND/608607 https://www.digikey.com/product-detail/en/PHR-2/455-1165-ND/608607]
* 455-3082-ND - [https://www.digikey.com/product-detail/en/jst-sales-america-inc/ASPHSPH24K152/455-3082-ND/6009458 https://www.digikey.com/product-detail/en/jst-sales-america-inc/ASPHSPH24K152/455-3082-ND/6009458]
* 455-3082-ND - [https://www.digikey.com/product-detail/en/jst-sales-america-inc/ASPHSPH24K152/455-3082-ND/6009458 https://www.digikey.com/product-detail/en/jst-sales-america-inc/ASPHSPH24K152/455-3082-ND/6009458]
* WM4201-ND - [https://www.digikey.com/products/en?keywords=22-23-2031 https://www.digikey.com/products/en?keywords=22-23-2031]
* WM4201-ND - [https://www.digikey.com/products/en?keywords=22-23-2031 https://www.digikey.com/products/en?keywords=22-23-2031]


== Installation Tips ==
You only need one of the each of those items. The wire comes terminated on both ends, all you will need to do is cut it in half and solder it to the 3pin header. You can also get just the crimp connector, but the only tool for crimping them properly runs $1400 USD (ouch) so getting the wire pre-terminated seems to be the best bet.
You only need one of the each of those items. The wire comes terminated on both ends, all you will need to do is cut it in half and solder it to the 3pin header. You can also get just the crimp connector, but the only tool for crimping them properly runs $1400 USD (ouch) so getting the wire pre-terminated seems to be the best bet.


== Modding the Mod ==
It is also possible to make the Noiseblocker fan even quieter for the most demanding of silent game console enthusiasts. The addition of a Noctua low speed resister can make the fan completely silent. (Hint this is a 51ohm 1w resistor Digikey; P51W-1BK-ND )
It is also possible to make the Noiseblocker fan even quieter for the most demanding of silent game console enthusiasts. The addition of a Noctua low speed resister can make the fan completely silent. (Hint this is a 51ohm 1w resistor Digikey; P51W-1BK-ND )


 
== Images ==
 
[[File:GC_3D_Print_Mod_001.jpg|300px]] [[File:GC_3D_Print_Mod_002.jpg|300px]]
Please see [http://retrorgb.com/3dprint.html the main 3D Print page] for more open-source 3D Printed designs!:

Latest revision as of 00:01, 5 February 2023


This is a mod designed by Greg Collins that adds a custom 3D printed fan mount for the GameCube, which allows you to install a standard 50mm x 10mm PC fan. The mod was created with the intention to use a quieter fan than the original system fan, but it also provides a means to replace failing parts in a system that is almost twenty years old.

Note: All of Greg's designs can be purchased from his web store here: https://laserbear.net/

Source Files

GameCubeFanMod V1.1.zip

Model files for this project are available for free, licensed under the Creative Commons Attribution license(Modifications and reproduction of the design are allowed, but require credit to the designer.

Recommended Hardware

Fan

Note: The noise blocker fan can be found on Amazon or likely any pc parts re-seller.

Connector

It may be helpful to get a compatible connector to interface with the original port. These can be found at digikey with the following part numbers/links, if you want to cut the wire off of your old fan that will also work.

Installation Tips

You only need one of the each of those items. The wire comes terminated on both ends, all you will need to do is cut it in half and solder it to the 3pin header. You can also get just the crimp connector, but the only tool for crimping them properly runs $1400 USD (ouch) so getting the wire pre-terminated seems to be the best bet.

Modding the Mod

It is also possible to make the Noiseblocker fan even quieter for the most demanding of silent game console enthusiasts. The addition of a Noctua low speed resister can make the fan completely silent. (Hint this is a 51ohm 1w resistor Digikey; P51W-1BK-ND )

Images

GC 3D Print Mod 001.jpg GC 3D Print Mod 002.jpg

Retrieved from "https://consolemods.org/wiki/index.php?title=GameCube:3D_Printed_Fan_Mod&oldid=21623"