Game Gear:Controller Port Mod

From ConsoleMods Wiki
Revision as of 05:01, 6 August 2023 by Derf (talk | contribs) (Created page with "Pxlmod Technologies ([https://www.behance.net/pxl3d Francis Bernier]) created a mod board to mount a Sega Genesis controller in a Sega Game Gear, ideally for use with a TV-out mod kit. You can purchase the kit from locations such as [https://console5.com/store/kits/controller-port/game-gear.html Console5] or [https://videogameperfection.com/products/sega-game-controller/ VideoGamePerfection]. == Installation == A full installation guide can be found File:Game Gear C...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Pxlmod Technologies (Francis Bernier) created a mod board to mount a Sega Genesis controller in a Sega Game Gear, ideally for use with a TV-out mod kit.

You can purchase the kit from locations such as Console5 or VideoGamePerfection.

Installation

A full installation guide can be found File:Game Gear Controller Port Mod.pdf.

The solder points are as follows for the various motherboards.[1]

VA1 837-9024

Up: C32 (top pad) Down: C33 (top pad) Left: C34 (bottom pad) Right: C35 (bottom pad) Start: C38 (right pad) I: C36 (bottom pad) II: C37 (left pad) +5V: C11(+) GND: C11(-) (alternate) +5V: C1(+) GND: C1(-)

837-7719-01

Up: C24 (bottom pad) Down: C25 (top pad) Left: C26 (bottom pad) Right: C27 (bottom pad) Start: C30 (right pad) I: C28 (bottom pad) II: C29 (left pad) +5V: C6(+) GND: C6(-)

Majesco VA5 837-10766

Up: C20 (left pad) Down: C21 (left pad) Left: C22 (bottom pad) Right: C23 (bottom pad) Start: C26 (bottom pad) I: C25 (right pad) II: C24 (bottom pad) +5V: C1(+) GND: C1(-) (alternate) +5V: C33(+) GND: C33(-)