LaserActive:PAC-S10: Difference between revisions
No edit summary |
|||
| (13 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
The PAC-S10 (PAC-S1 in the Japanese market) is a control pack module designed for use with the Pioneer Laseractive CLD-A100 Laserdisc Player. It contains the hardware for the Sega Genesis, based on the VA0-1.8 model 2 variant, Sega CD, as well as additional hardware allowing for the playback of Mega LD software specially designed for the | The PAC-S10 (PAC-S1 in the Japanese market) is a control pack module designed for use with the Pioneer Laseractive CLD-A100 Laserdisc Player. It contains the hardware for the Sega Genesis/Mega Drive, based on the VA0-1.8 model 2 variant, Sega/Mega CD, as well as additional hardware allowing for the playback of Mega LD software specially designed for the LaserActive. The PAC-S10 also supports playing Sega Master System games via a Sega Genesis flash cart and — with the help of an adapter or mod — [[LaserActive:Sega 32X Support|Sega 32X games]] are also supported. Due to the nature of the surface mount electrolytic capacitors used on these modules, ALL PAC-S10 and S1 modules should have capacitors replaced as soon as possible to avoid irreparable damage. | ||
== | == Select IR Pins Shorted == | ||
Some revisions of the PAC-S10/S1 came from the factory with pins D2 and C3 of the PAC connector shorted. This is no cause for alarm, simply leave it as is. | |||
<gallery> | |||
PAC-S1 C3D2 Short.jpg|SEL IR Pins (D2 and C3) Shorted | |||
</gallery> | |||
== | == Available Modifications == | ||
- | *[[LaserActive:PAC-S10_Audio_Circuit_Service_Bulletin_Update|Audio Circuit Service Bulletin Update]] | ||
*[[LaserActive:PAC-S10_PAC_ATTACK_Audio_Bypass|PAC ATTACK - audio bypass for cartridge audio, utilizing a similar circuit to the Genesis/Mega Drive Triple Bypass V2]] | |||
*[[LaserActive:PAC-S10 FRAM Save RAM Modification|FRAM - FM16W08 (direct drop in) or FM18W08 (tie pin 1 to GND or 5V)]] | |||
== PCB Photos == | |||
<gallery> | |||
PAC-S1 MAIN top.jpg|PAC-S1, SMAIN, Top | |||
PAC-S1_MAIN_Bottom.jpg|PAC-S1, SMAIN, Bottom | |||
PAC-S1 SSUB Top NoCaps.jpg|PAC-S1, SSUB, Top, Capacitors Removed | |||
PAC-S1 SSUB Bottom.jpg|PAC-S1, SSUB, Bottom | |||
</gallery> | |||
== Schematics == | |||
[[Media:PAC-S10 and S1 SUB Board Schematic.pdf| PAC-S10 SSUB Schematic]] | |||
Latest revision as of 17:30, 18 July 2022
The PAC-S10 (PAC-S1 in the Japanese market) is a control pack module designed for use with the Pioneer Laseractive CLD-A100 Laserdisc Player. It contains the hardware for the Sega Genesis/Mega Drive, based on the VA0-1.8 model 2 variant, Sega/Mega CD, as well as additional hardware allowing for the playback of Mega LD software specially designed for the LaserActive. The PAC-S10 also supports playing Sega Master System games via a Sega Genesis flash cart and — with the help of an adapter or mod — Sega 32X games are also supported. Due to the nature of the surface mount electrolytic capacitors used on these modules, ALL PAC-S10 and S1 modules should have capacitors replaced as soon as possible to avoid irreparable damage.
Select IR Pins Shorted
Some revisions of the PAC-S10/S1 came from the factory with pins D2 and C3 of the PAC connector shorted. This is no cause for alarm, simply leave it as is.
SEL IR Pins (D2 and C3) Shorted
Available Modifications
- Audio Circuit Service Bulletin Update
- PAC ATTACK - audio bypass for cartridge audio, utilizing a similar circuit to the Genesis/Mega Drive Triple Bypass V2
- FRAM - FM16W08 (direct drop in) or FM18W08 (tie pin 1 to GND or 5V)
PCB Photos
PAC-S1, SMAIN, Top
PAC-S1, SMAIN, Bottom
PAC-S1, SSUB, Top, Capacitors Removed
PAC-S1, SSUB, Bottom
