LaserActive:PAC-S10: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
The PAC-S10 (PAC-S1 in the Japanese market) is a control pack module designed for use with the Pioneer Laseractive CLD-A100 Laserdisc Player. It contains the hardware for the Sega Genesis/Mega Drive, based on the VA0-1.8 model 2 variant, Sega/Mega CD, as well as additional hardware allowing for the playback of Mega LD software specially designed for the LaserActive. The PAC-S10 also supports playing Sega Master System games via a Sega Genesis flash cart and — with the help of an adapter or mod — [[LaserActive:Sega 32X Support|Sega 32X games]] are also supported. Due to the nature of the surface mount electrolytic capacitors used on these modules, ALL PAC-S10 and S1 modules should have capacitors replaced as soon as possible to avoid irreparable damage.
The PAC-S10 (PAC-S1 in the Japanese market) is a control pack module designed for use with the Pioneer Laseractive CLD-A100 Laserdisc Player. It contains the hardware for the Sega Genesis/Mega Drive, based on the VA0-1.8 model 2 variant, Sega/Mega CD, as well as additional hardware allowing for the playback of Mega LD software specially designed for the LaserActive. The PAC-S10 also supports playing Sega Master System games via a Sega Genesis flash cart and — with the help of an adapter or mod — [[LaserActive:Sega 32X Support|Sega 32X games]] are also supported. Due to the nature of the surface mount electrolytic capacitors used on these modules, ALL PAC-S10 and S1 modules should have capacitors replaced as soon as possible to avoid irreparable damage.
== Select IR Pins Shorted ==
Some revisions of the PAC-S10/S1 came from the factory with pins D2 and C3 of the PAC connector shorted. This is no cause for alarm, simply leave it as is.
<gallery>
PAC-S1 C3D2 Short.jpg|SEL IR Pins (D2 and C3) Shorted
</gallery>


== Available Modifications ==
== Available Modifications ==
Line 5: Line 12:
*[[LaserActive:PAC-S10_Audio_Circuit_Service_Bulletin_Update|Audio Circuit Service Bulletin Update]]
*[[LaserActive:PAC-S10_Audio_Circuit_Service_Bulletin_Update|Audio Circuit Service Bulletin Update]]
*[[LaserActive:PAC-S10_PAC_ATTACK_Audio_Bypass|PAC ATTACK - audio bypass for cartridge audio, utilizing a similar circuit to the Genesis/Mega Drive Triple Bypass V2]]
*[[LaserActive:PAC-S10_PAC_ATTACK_Audio_Bypass|PAC ATTACK - audio bypass for cartridge audio, utilizing a similar circuit to the Genesis/Mega Drive Triple Bypass V2]]
*FRAM - FM16W08 (direct drop in) or FM18W08 (tie pin 1 to GND or 5V)
*[[LaserActive:PAC-S10 FRAM Save RAM Modification|FRAM - FM16W08 (direct drop in) or FM18W08 (tie pin 1 to GND or 5V)]]


== PCB Photos ==
== PCB Photos ==
Line 17: Line 24:
== Schematics ==
== Schematics ==


[[:Media:PAC-S10_and_S1_SSUB_Board_Schematic.pdf | PAC-S10 SSUB Schematic]]
[[Media:PAC-S10 and S1 SUB Board Schematic.pdf| PAC-S10 SSUB Schematic]]

Latest revision as of 17:30, 18 July 2022

The PAC-S10 (PAC-S1 in the Japanese market) is a control pack module designed for use with the Pioneer Laseractive CLD-A100 Laserdisc Player. It contains the hardware for the Sega Genesis/Mega Drive, based on the VA0-1.8 model 2 variant, Sega/Mega CD, as well as additional hardware allowing for the playback of Mega LD software specially designed for the LaserActive. The PAC-S10 also supports playing Sega Master System games via a Sega Genesis flash cart and — with the help of an adapter or mod — Sega 32X games are also supported. Due to the nature of the surface mount electrolytic capacitors used on these modules, ALL PAC-S10 and S1 modules should have capacitors replaced as soon as possible to avoid irreparable damage.

Select IR Pins Shorted

Some revisions of the PAC-S10/S1 came from the factory with pins D2 and C3 of the PAC connector shorted. This is no cause for alarm, simply leave it as is.

Available Modifications

PCB Photos

Schematics

PAC-S10 SSUB Schematic