Xbox 360:Converting to a Devkit

From ConsoleMods Wiki
Revision as of 00:40, 19 April 2023 by Glitchgod (talk | contribs) (Fixed missing punctuation)
Jump to navigation Jump to search
Exclamation-circle-fill.svgRead this page in it's entirety before following the tutorials!


RGLoader

RGLoader is a tool used to build a devkit NAND out of your own NAND dump. This devkit NAND can then be flashed onto your console, which enables debug features not otherwise available on a RGH/JTAG. This also installs xshell, the official development dashboard.

Keep in mind the following:

  • This has a significant risk of going wrong and bricking your console, especially if it is a JTAG.
  • RGLoader does not support RGH3, Use XDKBuild instead.
  • (may be different in new versions) RGLoader overwrites XeLL, so the only way to fix it is to use a hardware flasher to flash your old NAND dump.
  • DashLaunch will not work with a devkit NAND. However, any modifications to the SMC (such as fan settings) will be kept.
  • Fakeanim does not work with a devkit NAND, you will need to remove the ; and edit the path to your fakeanim in rgloader.ini if you wish to use one.
  • By default, it will boot into the xshell dash. You can change this by changing the path to a different dashboard's XEX in rgloader.ini.

MODDED WARFARE's Tutorial

XDKBuild

XDKBuild is a tool within J-Runner with Extras which allows you to build a devkit NAND from a retail NAND. This is the only way to convert to a devkit NAND on RGH3 systems.

Keep in mind the following:

  • This has a significant risk of going wrong and bricking your console, especially if it is a JTAG.
  • This is more basic than RGLoader, missing many features such as loading retail XEX/DVD's.
  • XDKBuild overwrites XeLL, so the only way to fix it is to use a hardware flasher to flash your old NAND dump.
  • DashLaunch will not work with a devkit NAND. However, any modifications to the SMC (such as fan settings) will be kept.

Installation

  1. On J-Runner with Extras click on "Load Source" and select your NAND image.
  2. On the XeBuild tab on the right select "17489" on the "Kernel Version" drop down menu.
  3. XDKBuild and other NAND options found will already be checked. Click on the "Create XeBuild" to build the new NAND image.
  4. The output will be found in your JRunner folder in a subfolder with various numbers. Flash the "updflash.bin" to your console in your preferred way.
Exclamation-circle-fill.svg16MB NANDS Only


  • Copy the "17489-fs" folder found inside "J-Runner-with-Extras\xeBuild\17489" to your HDD and rename it to "17489".