Game Gear:Video Output Notes

From ConsoleMods Wiki
Jump to navigation Jump to search

This section describes the three different TV-out mods available for the Game Gear: two RGB mods and a VGA+RGB mod. As an alternative to cutting the shell and mounting a new video output port, some people have used the EXT port on the Game Gear to output RGB video with one of the mods below.



McWill offers a Game Gear kit that outputs both RGB video, as well as two different VGA modes: One that displays the native aspect ratio and the other that stretches the aspect ratio to 4:3. Also, each VGA mode also has an option for scanlines, shown on the right below. Since he's getting the video signal digitally from the Game Gear, it allows him to make scaling effects while having the pixels stay in their right positions and not create any lag. Each mode is toggled by holding 1, 2 and Start at the same time.



Game Gear outputs RB in their native resolution of 160x144. The output quality is about on-par with Sega Master System games in RGB. The only downside is the Game Gear's 160x144 resolution will only fill about half of a 240p screen.


At the moment, there are two different places to purchase RGB-only TV-out kits.  The installation of either isn't very hard, it's just tedious and requires soldering to extremely small points.

  • McWill's LCD Upgrade Kit - McWill products can be bought at various online stores. The VGA kit mentioned at the top of this page can also output 240p RGB by turning the brightness knob all the way down.  Here's a screenshot of McWill's RGB board vs. Tim's. They both look excellent, but Tim's seems to be the tiniest bit sharper, both in the screen captures and when playing on an RGB monitor. Also, they both show a very small amount of interference in the image, but it's barely noticeable.