Search results

'''-Ribbon Cable<br>''' ...ated with this are the micro switches on the drive assembly and the ribbon cable.

* Damaged ribbon cable. ...people have luck with heating the ICs with hot air as a last resort before replacement.

== NTR 001 Screen replacement == * Replacement screen [https://www.ebay.com/itm/264786709312 Ebay]

...ens-funnyplaying FunnyPlaying GBC 2.0 Q5 IPS Laminated Backlight Kit] is a replacement screen for the Game Boy Color. It provides a much clearer image than the st ...part of the motherboard is facing up and the STA and SEL pads on the flex ribbon are facing down.

* Due to the replacement of the disc drive, original disks can no longer be used unless additional h ==Replacement Parts==

...that can support the LCD Board without putting any pressure on the ribbon cable. ...two small Phillips Head screws and a staple that holds the Vertical ribbon cable to the LCD Board. On the backside of a board bend the two legs of the stapl

...d-and-neo-geo-cd-drawer-tray-loading-belt.html Console5] as it is an exact replacement) ...to the bottom case. Carefully lift up the drive and disconnect the ribbon cable connecting it to the motherboard.

...board connection, but this can be fixed with just a clean, or a soldering/replacement job. Given how common they are, VA1s tend to be the easiest to find replacement parts for.

* <s> [[Genesis:Ribbon Cable Replacement]] </s> * <s> [[Genesis:Fuse Replacement]] </s>

...and hardwired power cord, which can be pushed inside the console to reduce cable clutter. Cartridges are inserted into a slot on the right edge, which has a ...n PAL regions, with French Intellivision consoles having a hardwired SCART cable carrying RGB output instead of RF.

...are in the correct places on the XK3Y. **Especially check that the ribbon cable is plugged in correctly, with the blue tab facing up on the XK3Y side, and ...the XK3Y main board. If it does not prompt you to select a game, check all cable connections.

...dered onto the motherboard (as opposed to being connected by a thin ribbon cable) and more extensive shielding was added, including a metal shroud over the ...hment|simply cleaning the connector]] to [[NES:Blinking Light Win|outright replacement of the connector]] with aftermarket alternatives. The AV/power box connecte

...An asterisk symbol (`*`) beside a console's name means that a Triad brand replacement power supply is listed by Firebrandx and/or Castlemania Games for this cons Generally speaking, the "Voltage" figure on the replacement power supply should match the specs of the OEM unit (see tables below) as c