Template:Xbox 360 eMMC Flashers

From ConsoleMods Wiki
Revision as of 01:49, 19 November 2024 by Nadaman (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

4 GB Xbox 360 S/E SKUs made after mid 2011 use an MMC NAND (Corona) or eMMC chip (Waitsburg/Stingray/Winchester) and require different tools to dump and flash the NAND compared to the 16/64/256/512 MB NAND chips. These 4 GB consoles require that you use an xFlasher 360, PicoFlasher, Element18592's 4GB USB tool, or an SD card tool. Consider the pros and cons below and choose the method that’s right for you.

A guide on how to dump and write to a 4 GB NAND can be found here.

Device Pros Cons
xFlasher 360
  • Reads NAND fast in 40 seconds to 4 minutes
  • Can also program glitch chips
  • Actively supported
  • USB-C
  • More expensive than other options
PicoFlasher
  • Usually has inconsistent dumping behavior
4GB USB Tool
  • Reads NAND fast in 40 seconds to 4 minutes (same as xFlasher)
  • Cheap
  • Comes with a header for the NAND pads, making future NAND reading easier
  • You will need a programmer to flash glitch chips
SD Card Tool (any brand)
  • Super cheap
  • Easy to find
  • Easy to DIY
  • You will need a dedicated programmer to flash glitch chips
  • Sometimes has inconsistent compatibility with SD card readers
Retrieved from "https://consolemods.org/wiki/index.php?title=Template:Xbox_360_eMMC_Flashers&oldid=51891"